Helpful tips

Why is my Dimplex heater not working?

Why is my Dimplex heater not working?

Most common reasons why a storage heater stops working completely is due to a faulty storage heater thermostat or a blown element. Dimplex suggest if you are a competent user comfortable taking off the front panel you may check to see if the thermostat is the cause of the problem (see below) to see if it can be fixed.

Why is my Dimplex quantum heater flashing red?

-If the display is flashing either red or blue, please adjust the temperature up or down using the selector dial. You can do this by pressing the round dial once and looking at what temperature is displayed on the screen of the Quantum. -The display will flash if the temperature has been turned down.

How do you unlock a Dimplex radiator?

To lock the controls press and hold both the Back button and Enter for three seconds. Child Lock will appear at the bottom of the screen. To unlock the control repeat the action by pressing both the Back button and Enter for three seconds. Your Dimplex GFPE Panel comes pre-programmed with four timer modes.

Why has my electric fire stopped working?

A tightly bent or over-stretched power cord may be causing the problem. Check your fuse box or breaker for any switches that have tripped. Inspect the fuse on the electric fireplace and replace if necessary. Try another wall socket.

Why is my Dimplex heater flashing?

The display is flashing or staying red -If the Q-Rad is obstructed by furniture, for example, then please move the obstruction and switch the Q-Rad off at the wall for 15 minutes before turning it back on. This should reset the Q-Rad and the fault should have cleared.

How do I know if my storage heater is working?

Use your continuity tester. One probe on each element terminal. If you get a reading then it’s OK. If it reads off scale/open circuit, then it’s blown and can be replaced.

How do you reset an electric fireplace?

SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.