What do I do when my Brother printer says Toner replaced?

When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the toner status. Swapping toner cartridges from one machine to another or installing a partially used toner cartridge may cause this issue.

How do I replace Brother toner?

Replace the Toner Cartridge

1. Make sure the machine is turned on.
2. Open the front cover.
3. Remove the toner cartridge and drum unit assembly from the machine.
4. Push down the green lock lever and take the toner cartridge out of the drum unit.
5. Unpack the new toner cartridge.
6. Remove the protective cover.

Can you override Brother printer toner low?

Brother Color Printer Low Toner Override For most Brother Color toner printers, you need to override their built-in toner counter to continue printing with low toner cartridges. The process involves manually resetting the counter, which fortunately is relatively easy to do.

How do I bypass Brother toner?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

How do you trick a Brother printer cartridge?

Method 1:

1. Turn the Brother printer off and then wait for a few minutes.
2. Open your printer’s cover by either lifting it or lifting a lever on the side.
3. Press the “Cancel” and “Print” buttons at the same time on the printer and then press the “+” button.
4. Press the “OK” or “Enter” key to complete the reset option.

Where is the toner in a Brother printer?

Open the front cover of your Brother printer to expose your toner and drum unit assembly. Pull out the assembly. Unbox your new drum unit. Looking at your toner and drum unit assembly, push down the green lever to release the toner cartridge from the old drum unit and install it into your new drum unit.

Why does my Brother printer keep saying no toner?

Your Brother printer will display the “no toner” message if the printer’s drum unit assembly or your toner cartridge was installed incorrectly. So if your Brother printer does not detect toner, you need to uninstall and reinstall the drum unit assembly and toner cartridge to rectify the problem.

How do I bypass Brother low toner?

1. Open the front cover of the printer.
2. Press the Clear / Back button.
3. Press the * button.
4. Press the 0 button.
5. Press the 0 button.
6. Close the front cover.
7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do I override my brother toner low tn450?

Open the front cover of the toner/drum section of the printer. Press and hold the “Go” button while turning on power to the printer. Release the “Go” button after “Toner, Drum, and Error” LEDs turn on with the “Ready” LED turn off. All LEDs will now be OFF.

How do you change toner in a brother printer?

Lift the current toner cartridge out of the drum unit assembly. Once you press down on the green lever, the toner cartridge should pop out of its hole. You can discard the old toner cartridge as your printer’s manual instructs. [ Brother] offers to recycle your old toner cartridge if you send them as long as you have a Brother account.

How do you replace toner in a hl-1110?

Open the cover and take out the drum unit assembly. Replace the toner cartridge. Slide the green tab on the drum unit from side to side 3 times. Be sure to return the tab to the home position (1). Put the drum unit assembly back into the machine and close the cover.

How do you replace toner in a drum machine?

Replace the toner cartridge. Slide the green tab on the drum unit from side to side 3 times. Be sure to return the tab to the home position (1). Put the drum unit assembly back into the machine and close the cover.

When do I need to replace the toner cartridge?

The Replace Toner message appears when the toner cartridge needs to be replaced. When the Replace Toner message appears, the following LED indications is shown on the control panel.