Do all broadcast addresses end in 255?

1 Answer. Yes, an IPv4 address can end in 255 without being a broadcast address. For it to be a broadcast address, all bits in the host part need to be ones. In your example, the 32-17 = 15 rightmost bits need to be all ones, not only the rightmost eight.

What is a 255.255 255.255 address?

255.255. 255.255 – Represents the broadcast address, or place to route messages to be sent to every device within a network. 127.0. 0.1 – Represents “localhost” or the “loopback address”, allowing a device to refer to itself, regardless of what network it is connected to. 169.254.

What should broadcast address be?

An IP broadcast address is the highest number in its class; for example, the broadcast address of a Class C 192.168. 16.0 network is 192.168. 16.255. The broadcast address for a subnet must account for the part of the address that is reserved for the subnet.

Can I use broadcast IP address?

A broadcast IP address is only assigned once in each network. It is always the last IP address of the subnet. The network address and the broadcast address are not used as computer IP addresses. In a network, the first address field is reserved for the network and the last for the broadcast address.

Can 255 be used in an IP address?

Yes, an IPv4 address can end in 255 without being a broadcast address. For it to be a broadcast address, all bits in the host part need to be ones. The broadcast address in this case would be 10.0. 127.255 .

Why is broadcast address used?

This address is used to transmit data to all of the hosts on the local subnet. The broadcast address is used by multiple protocols such as ARP, the Routing Information Protocol (RIP), and other protocols that must transmit data before they know the local subnet mask.

What is local broadcast address?

Local Broadcast Address: Local Broadcast Address is used to communicate with all the devices on a local network. It is represented by 255.255. 255.255 or 11111111.11111111. A broadcast address is used by hosts to request IP addresses from the DHCP(Dynamic Host Configuration Protocol) server.

Who receives a frame with the destination address FF FF FF FF FF FF?

What action will occur if a host receives a frame with a destination MAC address of FF:FF:FF:FF:FF:FF? The host will process the frame. The host forwards the frame to the router. The host sends the frame to the switch to update the MAC address table.