Other

How do I fix error code P0735?

by Chase Collins

How do I fix error code P0735?

How To Correct P0735 Gear 5 Incorrect Ratio

  1. Repair or replace any corroded or damaged wires in and around the transmission control module.
  2. Replace transmission fluid and wiring, if not in working condition.
  3. Repair or replace problem with the pump.
  4. Replace faulty shift solenoids.
  5. Replace faulty torque converter.

What is P0735 code?

P0735 is a diagnostic trouble code (DTC) for “Gear 5 Incorrect Ratio”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

What causes P0735 code?

Error Code P0735 is described as Gear 5 Incorrect Ratio. This refers to a problem in the fifth gear of the automatic transmission, usually caused by dirty or insufficient transmission fluid or issues in the solenoid.

How do you fix 4th gear incorrect ratio?

What Repairs Will Fix P0734?

  1. Change transmission fluid / filter.
  2. Repair or replace damaged wiring and/or connectors.
  3. Repair or replace failed transmission or torque convertor component.

What does gear 5 incorrect ratio mean?

What is the correct gear ratio code p0735?

Incorrect ratio codes typically require an advanced mechanical ability and diagnostic tools. Note: This code is similar to P0730, P0730, P0731, P0732, P0733, P0734 and P0736. If there are other transmission codes, repair those problems first before proceeding with an incorrect gear ratio code.

When to look for a p0735 error code?

P0735 is detected when A/T cannot be shifted to the 5th gear position even if electrical circuit is good. If the actual gear position is higher than the position (5th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

What does the OBD code p0730 mean?

What the P0730 code means. P0730 is the OBD-II generic code for an incorrect gear ratio detected in an automatic transmission.

What does po735 stand for in Allison Transmission Code?

PO735 is 5th gear incorrect ratio, meaning 5th gear is slipping. I know about the 5th gear ratio but can a NSBU cause this code or cause my drive or reverse to go to neutral if i don’t put foot on throttle right away