Are Kenwood subs any good?
Are Kenwood subs any good?
Kenwood makes good subs because they give you a real clear sound. Now if you get the excelon they sound way better tthen some mtx subs. And One of my friends had 4 excelons in a mitsubish eclipse and they sounded real loud, louder then 4 rockfords h2’s and they both had the same boxes.
Are 2 10 inch subs louder than 1 12?
Q: Which subwoofer will sound the deepest? But, generally speaking, given adequate power, the two 10″ subs will sound a little cleaner and punch harder because their combined cone surface area yields more sound pressure. The single 12″ sub, however, may sound a little deeper.
What are the top 5 subwoofers?
- 1 Rockford Fosgate P300.
- 2 MTX Audio Terminator Series TNE212D.
- 3 JL Audio 10W6v3-D4 10″ 600W Dual 4-Ohm Car Subwoofer.
- 4 Orion HCCA12 12″ Car Subwoofer 2000 Watts.
- 5 Rockville RVB12.
- 6 Kicker 44DCWC122 12″ 1200W Car Audio Subwoofer.
- 7 Dual Electronics BP1204.
- 8 Rockville RWS12CA.
What hits harder 12s or 15s?
no the 2 12s at 300Rms each AND 2 15s at 300rms each or would it be beter to get one large 15 that can handle 1200 watts RMS. If you want SPL, the 2 12s and 2 15s would hit harder.
What is the hardest hitting subwoofer?
The hardest hitting best 10 inch subs is the Planet Audio AC10D ten inch automobile subwoofer. It has a max power output of 1500 watts, with 750 w RMS.
Which size subwoofer is best?
The best subwoofer for you will be one that fits in your vehicle, one that you can properly power, and one that fits your budget. If size, power, space, and budget aren’t issues, go with the 12 inch subwoofers. If 12s won’t work, go with 10 inch subwoofers. If 10-inch subwoofers won’t work, go with 8 inch subwoofers.
What is the hardest hitting 12 inch subwoofer?
What 12 inch subwoofer hits the hardest? The Skar Audio Dual 12” Subwoofers in a vented enclosure hits the hardest. It has a peak power rating of 2400 watts with the RMS rating at 1200 watts.
Can you put 2 subs on a mono amp?
Sure, two subs will take up more room, but what do you want — trunk space or bass? This setup is perfect for a mono sub amp. By wiring the two subs in parallel (see the diagram) you’ll show a 2-ohm impedance to the amp. Two 4-ohm SVC subs — a great place to use a mono amp.
Is a 15 subwoofer louder than 2 12s?
“I say go with the 2 12s. More surface area than 1 15. So that makes 2 12 louder than 1 15.”
Do 10s hit harder than 12s?
But, generally speaking, given adequate power the two 10″ subs will sound a little cleaner and punch harder because their combined cone surface area yields more sound pressure. The single 12″ sub, however, may sound a little deeper.”