Can you put a 460 in a Fox body?

The 429/460 will set directly in the engine bay of a fox chassis(v6 fox will require a 5.0 k member swap or completely custom motor mounts) with the swap mounts and k member spacers(driver side valve cover may hit brake booster).

What transmission does a fox body have?

The T5 is a light-weight, light-duty transmission. For what it is (roughly 80 lbs and pretty compact), it is a pretty good transmission. However, throw one of these T5’s in a Mustang, and it is an entirely different story. Essentially, any T5 transmission is already at its limit – even on a stock Mustang.

How much HP can you get out of a Fox body?

LMR’s dyno run shows that even after 180,000 miles of use and 20 years of constant use the Fox Body remains stout. The dyno run shows 223 horsepower (166 kW) and 295 lb-ft (399Nm) of torque, which is right in line with Ford’s stock claim.

What is the best transmission for a 302?

For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.

Can a stock 302 handle a turbo?

yes, it will split right down the valley! usually stock blocks can only handle around 500-550.

How much horsepower can you get out of a 302 Ford engine?

Standard Ford 289 and 302 small-blocks were factory-rated between 200 and 230 hp. The vaunted 289 High-Performance engine was said to make 271 hp. Today, if a 302 Ford makes 360 hp on pump gas with a hydraulic cam, most experts consider it to be a pretty good motor-at least until Joe Sherman steps up to the plate.

Will a 351 transmission fit a 302?

* All the parts from the 302 with the exception of the distributor and intake manifold will fit a 351w, but some of them may be undersized. * Motor mounts will be the same, exhaust will sit a little bit higher due to the extended deck height on the 351.