How do I access my Buffalo NAS remotely?

How do I access my Buffalo NAS remotely?

Launch a web browser and enter the LinkStation’s IP address into the address bar to access Settings. If you do not know the LinkStation’s IP address, you can use NAS Navigator to access Settings instead. Click on the “Advanced Settings” tile. You will be asked to log in.

How do I access Buffalo LinkStation?

Knowledge Base

  1. Connect the LinkStation to your network using the supplied Ethernet cable.
  2. Plug in the AC adapter and connect to the LinkStation.
  3. Power on the LinkStation by moving the switch on the rear of the unit to “On”.
  4. Open NAS Navigator.
  5. Right-click on the LinkStation and choose “Settings” from the pop-up menu.

How do I access my Buffalo NAS via FTP?

More videos on YouTube

  1. Open the LinkStation GUI and click on the settings icon in the quick launch panel.
  2. In settings click on the “FTP” icon under “Services”.
  3. Click the checkbox to enable the FTP service.
  4. You can adjust the TCP port used by FTP as well as the maximum number of clients and clients per host.

How do I find my buffalo IP address?

Log in to Settings. From Settings, click the “Advanced Settings” tile. Click the “Network” tab on the left. Click on the widget to the right of “IP Address”.

How do I access Buffalo NAS on my phone?

Go to in your browser and the NAS site should open. Login with the credentials and you should be able to access your files on the go. Now you can proceed with Application installation on Android or I devices.

How do I add a Buffalo NAS to my network?

Mapping a Drive to a Buffalo NAS in Windows

  1. Open NAS Navigator.
  2. Right-click on the NAS.
  3. Select “Browse Shares” from the pop-up menu.
  4. Right-click on the shared folder you want to map to a drive letter.
  5. Select “Map network drive…” from the pop-up menu.
  6. Click on the drop-down menu to change the drive letter if desired.

What is the admin password for Buffalo NAS?

The default username and password are “admin” and “password”.

What port does Buffalo NAS use?

The Buffalo NAS Drive runs this Web access feature on TCP Port 9000. Since your NAS drive is on private ip address, you cannot access it over the Internet. For it to be accessible over the Internet, you must access it over your public ip address.

How do I reset Buffalo LinkStation to factory settings?

The LinkStation will be restored to its factory default settings….Initializing from Settings

  1. In Settings, navigate to [System] – [Restore/Erase].
  2. Click [Restore LinkStation].
  3. The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].

How do I connect Buffalo LinkStation to my computer?

NAS Navigator2 will proceed by setting up Automatic IP….How to: Connect a TeraStation or LinkStation directly to a PC.

1. Connect the Ethernet cable from PC LAN port to the NAS device.
2. For a PC, double-click the icon. For Mac OS, click the icon in the Dock. NAS Navigator2 will start.
3. Click [Refresh].

How do I login to my Buffalo router?

Buffalo Router Login Open your web browser of choice and type IP address of your Buffalo router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.