Most popular

How do I activate my Optus NBN wifi?

How do I activate my Optus NBN wifi?

connect your address using NBN Fibre to the Basement or Node you’ll connect your Optus modem to the NBN wall socket. Plug the Power Adapter into a power point and the other end into your modem. Switch both on. Heads up: The modem will start its special synchronisation sequence, which can take up to 15 minutes.

How do I setup my Optus wireless modem?

After you’ve plugged your modem in, please leave it switched on for at least 10 minutes to give it time to set up properly.

  1. Click on your web browser and type in newmodem.optus.com.au.
  2. Log in with your OptusNet username and password.
  3. Follow the prompts to activate your new modem.

How do I connect NBN to wireless router?

Connect the power cable to the Wi-Fi Router.

  1. Connect the power adapter to the power point.
  2. Connect the Ethernet cable into the ‘Internet’ or ‘WAN’ port.
  3. Plug the other end of the Ethernet cable into port UNI-D1 at the back of the nbn modem.
  4. Connecting via Wi-Fi.
  5. Search for available wireless networks on the computer.

How do I connect my phone to Optus NBN?

Grab the Ethernet cable with red connectors and plug one end into the red port on your modem – it’s the one that says ‘Fibre’. Plug the other end of the Ethernet cable with red connectors into the Uni-D Port on the underside of the nbn™ Connection Box (your Welcome Letter tells you which one it is).

How do I connect my home phone to my nbn modem?

You need to connect your telephone handset into the Uni-V port on the NBN Connection Box. For all other NBN technologies, you need to connect your telephone handset into the Phone 1 or Phone 2 port on the back of your modem.

What lights should be on my Optus nbn modem?

The Connection light should be solid blue. Flashing blue means it’s configuring. If there’s a solid or blinking red light, contact Optus technical support. The DSL and Internet lights should be solid blue, with blinking blue indicating that it’s configuring your NBN connection.

Can I use any modem with Optus?

PREVIOUSLY SUPPLIED BY OPTUS If you plan to use your own Cable modem, we recommend a DOCSIS 3 compliant modem / router (Minimum DOCSIS 1.1) for your Optus cable Broadband connection. See our list of approved modems below or contact us to confirm compatibility.

Why is my Optus WIFI modem not working?

Re: Optus modem Wi-Fi light not working Unplug everything exept for the power, Hold down the reset button for about 10 seconds then let go. Do not plug anything back in. Wait until the modem is fully rebooted and see if the WIFI light is turn on. If yes then start connecting other cables.

Is the nbn box a router?

HFC NBN: You’ll need a router. This will plug into the NBN connection box. Fibre to the Node NBN: You’ll need a modem router. This will plug into the telephone socket used to facilitate your NBN connection.

How do I connect my broadband router?

Plug in your router – plug the power adaptor into the wall and the other end into the power socket for the router itself. Switch on your router – use the on/off switch at the back of the router to turn it on. The lights should flash then show solid green. This means the broadband and Internet are connected.

Why does my landline phone not work with NBN?

Re: Home phone not working on NBN, internet working Firstly, make sure your landline is plugged into the green port on your modem. If it is and the issue is still present, please give the NBN team a call on 1800-834-273 for further investigation.

How do I connect my Optus modem to the NBN?

Plug the other end of the white cable with grey connectors into the NBN wall socket If NBN Co. connect your address using NBN Fibre to the Basement or Node you’ll connect your Optus modem to the NBN wall socket. Plug the Power Adapter into a power point and the other end into your modem. Switch both on.

How big should my Optus NBN box be?

Have a think about where you want the Optus nbn utility box to go outside, and where you want your Optus nbn connection box inside. The signal sweet spot is generally no greater than 1.5 metres away from your Optus WiFi Modem. Think easy access, good ventilation, no extreme temperatures, and keep it kid and pet bump free.

How to get admin password for Optus NBN Sagemcom router?

Ok, here is how to get the admin password for the Optus NBN SageMCOM router, for those people like me whose router encrypts the backupsettings.conf file. This will dump out the router’s entire config. Search for the AdminPassword tags: XXXXXXXXXXXXXXXXXXX

What can I do with my Optus WiFi?

Monitor your usage, pay your bills, reboot supported Optus modems, test your WiFi speed, get 24/7 support, and more. Need more help? Choose a topic below for more articles.