How do I connect my Phonak hearing aid to Bluetooth?

In the settings menu, tap on the Bluetooth icon. Tap on the slider button to turn Bluetooth on. Switch your Audéo Marvel hearing aids off and turn them after 5 seconds again on, to place the hearing aids in pairing mode.

What Bluetooth does Phonak use?

Any mobile device that supports Bluetooth, Hands Free Profile (HFP) and Advanced Audio Distribution Profile (A2DP) should work with your Phonak hearing aids. For phone calls, any phone supporting Bluetooth 2.1 and newer should work. Phones with Bluetooth versions prior to 2.1 may still work.

How does Phonak Bluetooth work?

Wirelessly connect to your favorite Bluetooth® enabled devices directly to your hearing aids. Phonak Bluetooth hearing aids enable hands-free phone calls from your iOS or Android device, and deliver stereo sound quality streaming for TV, music, videos, e-books, podcasts and more.

Why is my Phonak hearing aid Not working?

First, check whether you can make the sound louder using the volume control. Then check the tube and earmold for earwax residue and clean if necessary. Check that the battery is correctly inserted and prop- erly fitted, and adjust the fit if necessary. If there is no improvement, change the battery.

What is Le L Phonak hearing aid?

Phonak hearing aids use multiple versions of Bluetooth for mobile devices (Bluetooth Classic and Bluetooth LE or “Low Energy”). Some phones recognize each version of Bluetooth as a separate device.

How do I turn my Phonak hearing aid off?

To switch the hearing aid on or off, firmly press the button using the tip of your finger for 3 seconds until the indicator light blinks. When you switch on the hearing aid you may hear a start-up melody. Pull on the bend of the tube and remove the hearing aid from behind the ear.

How do you troubleshoot a Phonak hearing aid?

Troubleshooting for hearing aids

1. Check the battery or replace it.
2. Remove the earmold tubing from the earhook. Listen to the hearing aid and see if it works.
3. Soak the earmold and tube in soapy water. and blow out the tubing using the bulb syringe.
4. Put the hearing aid in the drying container for a day.