How do I connect my Polycom phone to web interface?

How do I connect my Polycom phone to web interface?

You can access the Polycom Web Configuration Utility using any compatible web browser installed on your PC.

  1. Power on the phone.
  2. Confirm that the PC and phone are on the network.
  3. Enter phone’s IP address into your supported web browser.
  4. For Username, enter: Polycom.
  5. For Password, enter: 456.

How do I find the IP address of my Polycom IP 6000?

  1. Find the IP address of the phone by navigating to Menu > Status > Network > TCP/IP Parameters.
  2. In the address bar of any web browser, type the IP address assigned to the Polycom phone, and then press Enter.

What is the password for Polycom Web Configuration Utility?

The default Administrator password is: 456. The default User password is: 123. To access the Web Utility: 1 Launch a compatible Web browser from your PC and enter the IP address of the phone you wish to configure into the address bar.

How do I setup my Polycom VOIP phone?

Using the keypad

  1. Press the Home/Menu button on the phone.
  2. Navigate to Settings > Advanced…
  3. Enter the default password (456)
  4. Navigate to Administration Settings…
  5. Navigate to Line Configuration…
  6. Navigate to Line 1…
  7. Navigate to Authentication… and fill in the following fields.

How do you lookup an IP address?

How do I find a device by IP address? In Windows, go to All Programs -> Accessories. Then right-click on Command Prompt. Choose Run As Administrator and type in nslookup %ipaddress% putting an IP address instead of %ipaddress%.

How do I connect my phone to my desk computer?

Use the USB Cable that came with your phone to connect the phone to a USB port on your computer. Open the Notifications panel and tap the USB connection icon . Tap the connection mode you want to use to connect to the PC.

What is the default password for Polycom HDX 7000?

It is at the bottom of the Poly display: Navigate to the IP address in your browser; you are prompted for a username and password. The default username is admin and the default password is the serial number of the HDX.

What is Polycom default password?

The default Polycom password is 456. If this password does not work, it means that somebody has changed it and you will need to factory reset your phone if you wish to access the admin menu. Use the instructions above to learn how to factory reset your phone in this case.

How do I setup my IP phone at home?

VoIP desk phones or handsets without PoE:

  1. Plug the AC adapter into the outlet, then plug it into the phone or handset base.
  2. Connect the IP phone to the switch or router using a CAT5e or CAT6 cable.
  3. Wait for the phone to initialize, then check for dial tone.