Most popular

How do I log into my Cisco modem?

How do I log into my Cisco modem?

Cisco router login:

  1. Make sure you’re connected to your network.
  2. Open a browser, and go to 192.168. 15.1.
  3. Enter the username and password.
  4. Default login credentials.
  5. Next Up: Speed up your Wi-Fi connection.

What is the default IP address for Cisco router?

192.168.1.1
Figure Out the IP Address If your Cisco Business router is new, the default IP address is 192.168. 1.1.

What is the default modem IP?

1.1 is the common IP address that is used by many modems and routers nowadays. It’s a default IP address where you can access your modem or wireless router to change settings, change the WiFi name or password. Sometimes, your modem or router may use a different IP address, such as 192.168.

What is the default Cisco username and password?

Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168. 1.1 or 192.168. 1.254.

How do you program a Cisco router?

Step-by-Step Configuration of Cisco Routers

  1. Step1: Configure Access Passwords.
  2. Step2: Configure a Router Hostname.
  3. Step3: Configure IP addresses for Router Interfaces.
  4. Step4: Configure Routing (Static or Dynamic)
  5. Step5: Save your configuration.
  6. Step 6 (optional): Configure NAT.
  7. Step 7 (optional): Configure DHCP.

How do I assign an IP address to a Cisco switch?

Configure an IP address on a switch

  1. enter the VLAN 1 configuration mode with the interface vlan 1 global configuration command.
  2. assign an IP address with the ip address IP_ADDRESS SUBNET_MASK interface subcommand.
  3. enable the VLAN 1 interface with the no shutdown interface subcommand.

How do I configure a Cisco router?

Router setup steps

  1. Step 1: Decide where to place the router.
  2. Step 2: Connect to the Internet.
  3. Step 3: Configure the wireless router gateway.
  4. Step 4: Connect gateway to router.
  5. Step 5: Use app or web dashboard.
  6. Step 6: Create a username and password.
  7. Step 7: Update the router’s firmware.
  8. Step 8: Create a Wi-Fi password.

Why does 192.168 1.1 not work?

If you cannot reach the login page, it may be due to: A hardwired connection configuration issue (such as a bad Ethernet cable) Entering the IP address incorrectly. An IP address issue on the computer.

What is the default password of Cisco switch?

How can I access my Comcast modem?

Connect the Comcast cable modem to a power source and power it on. Type in the address found under the modem into the URL bar. Press “Enter,” and the Comcast cable modem settings will appear on the screen. These settings include whether you have the device connected to a wireless router, username and the IP address.

What is the Comcast default IP address?

All Comcast XFINITY routers come with a default IP address of 192.168.100.1, 10.1.10.1 or 192.168.1.1. If those addresses don’t work, there are two other methods of obtaining the default IP address. The first way is by checking the IP address from the sticker that’s attached to the router’s packaging.

How do you find the IP address of a modem?

Click the Windows Start button , type “cmd” in the Search box and press “Enter” to open the Command Prompt. 2. Type “ipconfig /all” in the Command Prompt and press “Enter” to run the command. 3. Locate the “Default Gateway” line. The IP listed on the Default Gateway line is the IP address of your modem.

What is a Netgear router’s default IP address?

Launch your desired web browser

  • Visit www.routerlogin.net or www.routerlogin.com OR Type default gateway address 192.168.1.1 or 192.168.0.1
  • Login with your username and password