How do I reset my SonicWALL to factory settings?

Load factory default configuration on the Sonicwall TZ 215

1. Power off the Sonicwall TZ 215.
2. Using a pin hold down the reset button and power the Sonicwall TZ 215 on.
3. Release the reset button once the wrench light begins to blink on the front of the Sonicwall TZ 215.

How do I reset my SonicWALL TZ 150?

Take the tip of a pin or unfolded paperclip to press and hold the reset button down for at least 10 seconds to start the reset process. If you don’t hold the reset button down for long enough it will only reboot the router instead of resetting it.

How do I reset my SonicWall TZ 200 to factory settings?

Open a Web browser on your computer, type “192.168. 168.168” into the URL box and press “Enter.” On the SafeMode Management display, click the boot icon on the “Current Firmware with Factory Default Settings” line. This will reboot the SonicWALL to its factory settings state and you can now reconfigure as needed.

How do I start my SonicWall in safe mode?

Putting the SonicWall into Safe Mode Using a paperclip or similarly sized object, press and hold down the RST button located in the small hole on th front of the device for at least 60 Seconds. Once the test light on the device becomes solid or begins to blink then the SonicWall is in safe mode.

How do I reset my SonicWall VPN?

Login to SonicWall go to Manage | Updates | Restart. Click Restart .

How do I get my SonicWall out of safe mode?

Use a paperclip or toothpick to press and hold the reset button on the back of the appliance for ten to fifteen seconds. The reset button is in a small hole next to the console port or next to the power supply, depending on the SonicWall model.

How do I reset my SonicWall TZ 205 to factory settings?

How do I reset my tz270?

Insert the paperclip into the reset hole and hold the reset button whilst you power the unit on. Hold the button until the spanner light starts flashing. Take the paperclip out of the hole. The SafeMode management display will appear.

What is SonicWall safe mode?

The SafeMode feature allows you to recover quickly from uncertain configuration states with a simplified management interface that includes the same settings available on the System > Settings page. The Test light begins to blink when the Dell SonicWALL security appliance has rebooted into SafeMode.