Most popular

How do I sync my Harmony remote?

How do I sync my Harmony remote?

Syncing changes to Harmony

  1. To sync changes using your remote, navigate to Menu > Settings > Sync Remote.
  2. To sync changes using the Harmony mobile app, navigate to Menu ( or ) > Harmony Setup > Sync.

Why is my harmony hub not working?

If Harmony stops sending commands or Harmony app is unable to discover the hub, rebooting Harmony Hub often resolves the problem. To reboot Harmony Hub, disconnect the power cable, wait 10 seconds, then connect it again.

How do I unfreeze my Harmony remote?

Just hold down the Off button at the top of the remote for 15 seconds and then power it back up again. For hub-based remotes or the Harmony Express with its remote blaster, you might need to reboot the hub or blaster instead. To reboot either device, unplug it for 10 seconds and then plug it back in.

How do I reset my Harmony 650 remote?

Press and hold the Menu button (located above the Channel Up button) and the Off button together for 20 seconds. The remote screen will turn off, then turn on again displaying the image of a remote and a circular arrow. After a few seconds your remote will be restored to factory defaults and you may sync again.

How do I add a device to my Harmony 900 remote?

How to add a device to your Harmony remote

  1. Launch the Harmony app and connect to your Harmony hub.
  2. Select MENU, then Harmony Setup > Add/Edit Devices & Activities > DEVICES.
  3. Select the ADD DEVICE button at the bottom of the screen.
  4. Press SCAN FOR WI‑FI DEVICES to auto-detect any devices.

How do I make my Harmony Hub discoverable?

Mobile Desktop

  1. Launch the Harmony app and connect to your Harmony hub.
  2. Select MENU, then Harmony Setup > Add/Edit Devices & Activities > DEVICES.
  3. Select the ADD DEVICE button at the bottom of the screen, followed by ENTERTAINMENT DEVICE.
  4. Enter the manufacturer and model number for your device, then select ADD.

Can’t connect to Harmony servers?

In most cases, restarting your Harmony remote will resolve sync related issues. Restart/reboot your Harmony remote (and hub), mobile device and Wi‑Fi router. For mobile devices, turn off then back on (or toggle) Wi‑Fi as well as Bluetooth. Make sure the Harmony mobile app and hub are on the same Wi‑Fi network.

How do you reset a Harmony remote?

How do I add a device to my Harmony 650 remote?

How do I add an IR device to Harmony?

Using the Harmony app

  1. Navigate to MENU, then select Harmony Setup > Add/Edit Devices > REMOTE & HUB.
  2. Select REMOTE & HUB (or HUB) and then press the IR ASSIGNMENTS button.
  3. Select the device that you would like to change how Harmony controls it.
  4. Select how you would like to control the device.

How do I reset my Harmony Hub?

Unplug your hub and then hold the Pair/Reset button on the back while plugging it back in. The light on the front of the hub will flicker red for approximately 30 seconds as the hub restores itself to factory defaults.