Other

How do I unlock channels on my Uniden scanner?

How do I unlock channels on my Uniden scanner?

Uniden Bearcat BC125AT Handheld Scanner, 500-Alpha-Tagged Channels, Close Call Technology, PC……

  1. Press Hold to stop scanning.
  2. Press and hold L/O until “Confirm Unlock All Channels?” appears in the display.
  3. Press Pgm/E to unlock all or .Clr to cancel.

How do I program my Uniden BC125AT with my computer?

Instructions for Programming Your Uniden BC125AT Scanner

  1. press HOLD.
  2. enter the channel location you want to store your frequency into.
  3. press FUNC.
  4. press E.
  5. press E again.
  6. type in your frequency.
  7. press E.
  8. press “.” button to exit.

How do you program a bearcat police scanner?

Programming a Handheld Model of the Uniden Bearcat Scanner

  1. Ensure the battery is fully charged, or plug in the AC adapter.
  2. Press the “Scan” button to put the handheld into scanning mode and press “Manual” to enter manual programming mode.
  3. Enter the frequency you wish to store, using the numeric keypad.

How do you program a bobcat scanner?

How do I setup my Uniden Bearcat scanner?

  1. Press HOLD.
  2. Enter desired Channel (Not Frequency)
  3. Press HOLD.
  4. Press the FUNC key.
  5. Press E.
  6. Enter in the Frequency you want to program.
  7. Press E to store the frequency in. Done!

How do you unlock a police scanner?

Look for a “Lock” button among the buttons on the front of the device. Press and hold the button down until the key icon on the LCD display goes out. The device is unlocked and ready for normal use.

What does lockout mean on a scanner?

Temporary Lock-Out Function – lets you set your scanner to skip over specified channels or frequencies when scanning or searching. This temporary lock-out releases when you manually unlock the channels or frequencies or when you power down the scanner.

How do I program my Uniden scanner?

Instructions for Programming Your Uniden BC75XLT Scanner

  1. Press HOLD.
  2. Enter desired Channel (Not Frequency)
  3. Press HOLD.
  4. Press the FUNC key.
  5. Press E.
  6. Enter in the Frequency you want to program.
  7. Press E to store the frequency in. Done!

How to program a Uniden Bearcat scanner-software?

Scanner 101 Topic: Manually programming the BC125AT Scanner without software. Press Hold Button and Press the channel number you want to program then hit hold again. Press “Func” (Orange Button) then hit “Pgm E” button. “Enter Frequency” will be highlighted press “Pgm E” button.

What is the frequency of the Uniden Bearcat ubc125xlt?

NEW – Uniden UBC125XLT is a compact 500 channel handheld scanner, frequency coverage from 25-88MHz, 108-174MHz, 225-512MHz and 806-960MHz with 5/6.25/8.33/10/12.5KHz frequency steps. Includes Military Aircraft Band, CTCSS/DCS Squelch Modes and Alpha Tagging features too.

What are the presets for the Bearcat scanner?

Pressing the button once lockouts the frequency temporarily. To permanently lock it out, you must press the button twice in rapid succession. Built-in Auto service Searches in 10 preset bands: police, fire/emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB Radio, FRS/GMRS/MURS/, and Racing.

Is there a way to dim the backlight on a Bearcat scanner?

Unfortunately, though you can turn off the backlight, there is no button or knob to dim it if you wish to save battery juice. The buttons on the keypad are large, soft, and well-placed. You get a nice tactile feel when you press them and the spacing of the https makes it easy to remember where the buttons are placed.