How do I use the WPS button on my BT router?

Press the Wireless WPS button on the rear of your Hub for more than 3 seconds but for less than 15 seconds. Your computer will now automatically establish a wireless connection with your Hub 3. The Wireless light on the Hub will slowly flash orange then steady blue when the connection is successful.

Does pressing the WPS button reset router?

Did the WPS process time out? The WPS light will continue to flash and the router search for devices for up to 2 minutes. If it doesn’t connect successfully in that time, it will usually reset and you will need to press it again to try a new connection.

Does BT Smart Hub 2 have WPS button?

If your device supports WPS, press the WPS button on the side of the hub and follow your device’s instructions to connect. 2 3 If you’re still having problems you can call us on 0800 800 150. * Go to bt.com/help It’s the quickest and easiest way to get help, all day, every day.

What is the WPS button for on BT Smart Hub 2?

WPS (Wi-fi Protected Setup) lets you connect a device without entering the wireless password. You can turn it on or off. When it’s set to ‘On’, you can connect a device by clicking Start WPS or by holding the WPS button down on the left hand side of your Hub. The light on the left of the Hub will flash blue.

Why is my router WPS not working?

If your router is not working after pressing the WPS button, check if the time has been exceeded 2 minutes from the time you have enabled the WPS feature on your device. If this is the case, reconnect your device to your router using the WPS Push Button method.

Why did my Wi-Fi stop working when I pressed WPS button?

Where is WPS button on BT Smart Hub 2?

What does the WPS button on the BT Hub mean?

All BT Hubs have a firewall, which is turned on by default. WPS (Wi-Fi Protected Setup) is a method of quickly connecting devices to a router simply by pressing the dedicated WPS button on the hub. It’s built into all BT Hubs. As well as being a more convenient way to connect, it means you don’t have to share your password if you don’t want to.

What does the WPS button on my router mean?

Please try again later. WPS stands for “Wi-Fi Protected Setup,” It gives you an easier way to connect devices to your router. If you’ve connected a device to a router before, you’ve likely experienced the horrors of default router passwords.

How do I set up a WPS button?

Verify that the router and the internet capable device supports the WPS feature: Look on your modem or router to see if it has a WPS button: Go into the Network menu of your internet capable device to see if the WPS option is available. Follow these steps to set up a WPS (Push Button) connection:

How does Wifi Protected Setup ( WPS ) Work?

Wi-Fi Protected Setup™ (WPS) is a feature that lets you easily connect WPS-supported client devices, such as wireless printers, to your router wirelessly. This article will provide three (3) methods that you can follow depending on what client device you are using to connect to the router through the WPS feature.