Questions and answers

How do you reset a Lux psp511?

How do you reset a Lux psp511?

Open the door on the front of the thermostat and look for the small round recessed button labeled “RESET” Hold this button down for at least 5 seconds. The screen should fully populate temporarily. You will see all 8888’s in the display. Correct the day and time and then enter back in all your custom program values.

Why is my Lux thermostat not working?

If your Luxpro thermostat stops working, first replace the batteries. Also check the circuit breaker, reset the thermostat, and check if the wires are faulty.

How do you troubleshoot a luxpro thermostat?

Luxpro Thermostat Not Working

  1. Restart the Thermostat. One of the most common troubleshooting techniques that can help you out from most of the tight corners is restarting the thermostat.
  2. Reset.
  3. Clean it off.
  4. Check the wiring.

How do I reset my Lux thermostat?

How do I reset my thermostat?

  1. Take the front of the thermostat off the wall and look for a small white round reset button on the right side labeled “H.W. Reset”.
  2. Hold this button down for at least 5 seconds.
  3. The screen should fully populate temporarily.

What is reset button on thermostat for?

Hold Temperature – You can use this button to set the temperature to remain at that level until you change it again. This is most helpful if you know you will not be home all day, like if you go away for a day trip, so you set the temperature to a lower setting, not to be reset until you return.

How do you clear a thermostat override?

To clear OVERRIDE press UP/DOWN until original set temperature appears or wait for the start tf the next period. Press HOLD. Adjust temperature as desired with UP/DOWN. To clear, press HOLD again.

How do you reset thermostat?

A common way to reset almost any thermostat is to hold down the reset button for 5+ seconds. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.

How do you reset a thermostat?

Here are the step-by-step reset instructions:

  1. Turn your thermostat off by switching it to the off position.
  2. Find the breaker that powers your HVAC system and turn it off.
  3. Wait 30 seconds and turn the breaker back on.
  4. Turn your thermostat back on.

What should I do if my luxpro thermostat is not working?

Ensure the thermostat has power if plugged into an electrical outlet but it is not functioning. Check the fuse or circuit breaker. Replace or reset as necessary. Replace the batteries in the Luxpro thermostat if the unit is heating or cooling above or below the set temperature or does not turn off as expected.

How do you change the day on a psp511?

If you wish to change the day and or time, perform the following steps: open the front door of the thermostat. Turn the rotary dial to “Set Day/Time”. You will see the day blinking at the top. Press the “Up” button until it shows the correct day. Press “Next” You…

How does the hold function on the psp511 work?

Use the HOLD feature on the thermostat to allow manual control, or set a light temperature while you are away. This bypasses all the programs and provides a constant temperature permanently until you manually take it out of the HOLD mode again. You can freely adjust the temperature while a…

What to do if your psp511 thermostat is not working?

If your thermostat is behaving erratically or something strange is in the display, pressing the reset buttons can often correct the problem. Hardware Reset: Try this first since it does not erase anything. Take the front of the thermostat off the wall and look for a small black round reset…