How do you reset the maintenance light on a Honda CRV?

To reset your honda crv maintenance light, turn the key to the “on” position in the ignition and then turn it off. Depress the odometer trip -bť button, and hold it down while you turn the key to the “on” position again. The light should go off.

How do you reset the maintenance required light on a 2002 Honda CRV?

To the right lower side of the instrument cluster is the reset button. Turn off the engine press it down and hold it down, turn the ignition key to the on (not run position) and keep the button down for 10 to 15 seconds it will reset the maint. light.

Where is the reset button on a Honda CRV?

Press the Select/Reset button located on either your steering wheel or as a knob on your dash. Depending on your model, either scroll through or press the knob repeatedly until “Engine Oil Life” or “Engine Oil Indicator %” is displayed.

How do you reset the maintenance required light on a 2005 Honda CRV?

2005 HONDA CR-V Maintenance Light Reset Instructions

1. Turn off the engine.
2. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
3. Hold the button for at least 10 seconds, until the indicator resets.

How do you reset the maintenance required light on a 2003 Honda CRV?

Press and hold the Select/Reset button, between the E on the fuel gage and the odometer on the dashboard instrument panel. At the same time, turn the ignition to the ON position, but do not start the car. After about 10 seconds the maintenance indicator light will go off.

Why is my maintenance required light on Honda?

If your engine maintenance light has come on before it’s recommended scheduled 5,000 mile oil change, the Maintenance Minder system has predicted early breakdown of the additives in your oil based on use and engine conditions.

How do you reset the maintenance light on a Honda?

This method should work on any Honda trim model that has a touch screen with a home screen.

1. Press home.
2. Select settings.
3. Press vehicle settings.
4. Scroll down to maintenance info and press it to select it.
5. Press reset.
6. A screen will pop up asking if you really want to reset it or cancel. press reset and that should do it.

How do I reset maintenance light?

Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.

How do I reset the required maintance light?

Turn ignition switch to the ON position

How do I Turn Off the maintenance required light on my Honda?

How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.