How high does a flue have to be for a wood burner?

How high does a flue have to be for a wood burner?

4.5 m
The minimum chimney height recommended for minimum performance of wood burning and multi fuel appliances is 4.5 m from the top of the appliance to the top of the chimney. It is best to position the chimney, so that it goes straight up as near to the roof ridge as possible.

Do you need a flue liner for wood burning stove?

A chimney liner is obligatory if you are installing a woodburning stove, gas fire or open fire in a new build property to comply with Document J of current Building Regulations. A chimney liner may be necessary in an older property if the flue inside your chimney is no longer safe to use.

What flue do I need for a log burner?

The general rule is as follows: For a stove of up to 20kW a minimum of 6” diameter flue is needed. You can use a 5” diameter flue liner if you have a DEFRA approved stove and the manufacturer clearly states this is compatible.

Can you pipe a wood stove into a chimney?

Stoves can be added to a fireplace in several ways. Free-standing stoves can be installed so that the stove pipe enters into the fireplace chimney above the damper, through the damper or into the firebox below the damper. Properly designed stoves can also be inserted into the fireplace opening.

What’s the difference between 316 and 904 flue liner?

The 316 liner is suitable for most domestic wood burning stoves, whereas, the 904 is a higher grade liner, which is thicker and more resilient than the 316 and is suitable for multifuel appliances, the use of smokeless fuels and for boiler stoves, due to the slightly higher production of acidic condensates when burning …

Can you reduce a 6 inch flue to 5 inch?

If you want to burn wood in an appliance that has a 5-inch outlet, you will need to install a 6-inch flue liner. There are a range of flue adaptors that will allow you to do that. You can step up in size as required, but you can’t step down.

Why is a wood stove better than a fireplace?

Like a fireplace, a wood-burning stove can help warm your home during the otherwise cold winter months. Wood-burning stoves, in fact, are actually more efficient at converting wood to heat than fireplaces. Therefore, wood-burning stoves are up to three times more efficient than fireplaces.

Can you install a wood burning fireplace in an existing home?

Be assured that it is possible to add a fireplace to an existing home. You’ll just need to determine which one will work best. Get familiar with your area’s building codes to check requirements such as minimum clearances around vent pipes and limits on fireplace emissions.

What kind of flue pipes are used for wood burning stoves?

Flues for wood-burning and multi-fuel stoves, including flexible flue liner, single skin flues and insulated flues or twin wall flues. Chimneys and flues are also available in a number of different materials – stainless steel, concrete, pumice, clay or ceramic and plastic.

What kind of flue do you need for a chimney stack?

If you are installing a wood burner / stove into an existing chimney stack we have all the flue supplies you may need e.g. multi fuel flexible flue liner, chimney liner, vitreous enamel stove pipe. Or if you do not have a chimney stack you will need twin wall chimney flue pipe.

How does a flue liner work in a chimney?

Also often referred to as a chimney liner, a flue liner is a flexible tube that is connected to your stove pipe to line the inside of your chimney. It runs up the entire length of your chimney, carrying the fumes up your flue liner instead of releasing them straight into your chimney cavity. How do I know if I have a chimney liner?

How is a chimney connected to a wood burner?

If building your flue pipe through the wall, it will have to be stripped back to the brickwork. You hearth will be laid and stove put in place. The stove pipe will be attached to your stove and the twin wall flue fitted. Pieces will be connected together for it to make its way either through the ceiling or along your outer wall.