What is a T10 base bulb?

T10 Bulbs / T10 Incandescent Lamps Commonly used in exit signs, showcases, picture lights, and illuminated display units, T10 incandescent bulbs are simple replacements for T10 lamps that have burned out. You can always choose to replace your T10 light bulb with LED.

What base is T10?

The T10 comes in 194, 168, W5W, 147, 152, 158, 159, 161, 168, 194, 192, 193 – and they all basically look the same. In fact, they all have the same base, they’re all made the same with the same incandescent filament – the only difference is the wattage.

What is a T10 bulb equivalent to?

T10 bulb shape. Uses only 6 watts, but has a light output comparable to a 60 incandescent bulb. 600 lumens.

What is a T10 socket?

T10 Wedge Socket Works with any T10 or 194 miniature wedge base bulbs. This socket has approx. 11.5 inches of black and red wire for easy installation. Great for small and compact lighting projects. Light socket with approximate 8 inches of wire.

Are T9 and T10 bulbs interchangeable?

So a T9 would be a 1 1/8″ diameter tube and a T10 would be a 1 1/4″ diameter tube. If you are wanting a T10 the bracket that holds it may be too large of a diameter to safely hold the 33890. Good luck.

Will T15 fit T10?

T10 LED light bulb is 0.8 inches in size, 0.375 inches in size; T15 LED light bulb is 1.1 inches in length, 0.5 inches in diameter. The T10 led bulb could be absorbed a T15 socket, but T15 led bulb cannot utilize in T10 socket.

Can T8 replace T10?

Usually the old T10 and T12 tubes, are comes in 8ft with Fa8 or R17d base, instead of G13 bi-pin base. Now the LED Tubes T8 are available for all those base and 8ft, and also 2ft, 3ft, 4ft, 5ft, 8ft too. So it’s quite convenient to use a T8 LED Tube to replace the old T10 and T12 tubes.

Are T8 and T10 bulbs interchangeable?

T8, T10 and T12 tubes, despite being slightly different in size, all have the same end connectors, so they will all fit in the same fluorescent fixtures.

What is the difference between T8 and T10 bulbs?

The difference is the diameter of the lamp (T8 = 1″, T12 = 1.5″) and the type of ballast. Basically, T8 = 1 inch diameter, T10 = 1.25″, and T12 = 1.5″ diameter.