What is RS-232C cable used for?

An RS-232 serial port is most often used by repair technicians to perform diagnostics and service updates. It may also be used to control a device when connected to a computer running a home automation system or Custom Integrated Audio/Video (A/V) system, such as the CAV-M1000ES Multi-room A/V Distribution System.

What is a RS-232C input?

RS-232C is the interface that your computer uses to talk to and exchange data with your modem and other serial devices. Since data in your computer flows along parallel circuits and serial devices can handle only one bit at a time, the UART chip converts the groups of bits in parallel to a serial stream of bits.

What is rs232c on a TV?

RS-232 is an advanced and specialized form of installation that allows the TV to be controlled through a cable connected directly to the TV. Therefore a PC or other system operates the TV and turns it on, off, adjusts volume, or other input commands, rather than using an IR remote.

What is the difference between RS-232 and rs232c?

Because this adoption date was so long ago, most manufacturers, including National Instruments, have dropped the “C” from the name and simply refer to the protocol as RS-232. In common, modern usage, there is no difference between RS-232 and RS-232C, protocol.

What is the difference between RS232 and RS485?

RS232 is more than able to perform for a short distance and low data speed requirements. RS232 has a transmission speed of 1Mb/s up to 15M. However, RS485 has a data transmission speed of up to 10Mb/s for a distance of 15M. At the maximum of 1200M, RS485 transmits at 100Kb/s.

Is RS485 faster than RS232?

Data Transmission Speed RS232 is more than able to perform for a short distance and low data speed requirements. RS232 has a transmission speed of 1Mb/s up to 15M. However, RS485 has a data transmission speed of up to 10Mb/s for a distance of 15M. At the maximum of 1200M, RS485 transmits at 100Kb/s.