What is SD1 anchor?

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry.

Is a power stud a wedge anchor?

The Power-Stud anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry.

What’s the best anchor for brick?

Zinc plated sleeve anchors should be used in indoor dry areas, stainless steel sleeve anchors should be considered for use in outside applications. All sleeve anchors come pre-assembled and ready to use. The hole that is required to be drilled into the brick is the same diameter as the sleeve anchor being used.

What is the best anchor for a block wall?

Machine Screw Anchor – is best used in the solid section of a cinder block because it requires the bottom of the hole to be used for proper setting and expansion.

How deep should concrete anchors go?

Steps to Installing Concrete Fasteners The hole should be drilled 1/4″ to 1/2″ deeper into the base material than the anchor will penetrate. This allows for any material to fall when the anchor is inserted into the hole. After the hole is drilled, it must be cleaned of all debris, material or dust.

What is the difference between a wedge anchor and a sleeve anchor?

The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete. Concrete sleeve anchors can be used in concrete, brick or block but their holding values are less in terms of shear and pullout values.

What kind of base is power stud SD2?

Power-Stud®+ SD2 High Performance Wedge Expansion Anchor The Power-Stud+ SD2 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete and concrete over steel deck.

What kind of base for power stud anchor?

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry.

What kind of concrete can power studs be used in?

Tested in accordance with ACI 355.2 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14 Chapter 17 or ACI 318-11/08 Appendix D Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)