Questions and answers

What is TD-W8961N?

What is TD-W8961N?

The TD-W8961N does the work of several networking devices packed into one sleek device. With an ADSL2+ modem, NAT router, 4-port switch and 300Mbps wireless N access point, this device eliminates the need to purchase multiple devices to access and share a high-speed internet connection.

Does TD-W8961N support VDSL?

The TD-W9970 supports VDSL/ADSL or Ethernet WAN connections (EWAN) that allow users to have the flexibility of different Internet connections. Featuring an interchangeable LAN/WAN port, it is compatible with Fiber/Cable service.

How do I use my TD-W8961N as a repeater?

Step 1 Log into TD-W8961ND’s management page. If you are not sure about how to do this, please click here. Step 2 On the top-side menu, click Interface Setup->Wireless, change the channel to a fixed one, like 4. Step 3 Check the SSID of the main TD-W8961ND, and set the wireless security for it.

How can I convert my TP-Link ADSL modem to wireless router?

Step 1: Connect your computer to LAN port of TP-Link DSL modem router via a cable. Step 2: Power on the router. 1. Log into the router using or the default IP address 192.168.

What is the IP of TP-Link Router?

Normally your TP-Link Router’s default IP address is or While if your network manager has changed it before, you can refer to the following methods to find your TP-Link Router’s IP address according to your operation system.

How do I reset my TD-W8961N?

To reset the TP-LINK TD-W8961N to its default settings, you have to do the following steps:

  1. Put router into operation.
  2. Press RESET button and hold for at least 5 seconds.
  3. Device restarts automatically.
  4. Router has been reset to factory settings.

How can I change TP-Link admin password?

Go to Management > User Management. Select your username as admin or user. Enter the old password. Set a new password.

What is a bridge mode?

What is bridge mode? Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict.

What is the WiFi repeater?

A WiFi repeater or extender is used to extend the coverage area of your WiFi network. It works by receiving your existing WiFi signal, amplifying it and then transmitting the boosted signal.

Can I use my modem as a router?

You can convert a modem to a wireless modem by way of a wireless router enables a user to connect to the Internet from anywhere within a given range. WiFi enabled computers or other WiFi-ready electronic devices, including wireless printers and gaming consoles. Turn off and unplug the power from your modem.