What is the Electricity at Work Regulations 1989 summary?

​​Electricity at Work Regulations (1989) The ​Electricity at Work Regulations apply to all aspects of the use of electricity within the workplace. They place duties on employers, employees and the self-employed to prevent danger. carry out work on electrical systems carried out in a way that prevents danger.

What is the purpose of Electricity at Work Regulations 1989?

Electricity at Work regulations aim to prevent death or injury to any person from electrical causes while working or in a work environment. This can include electric shocks or burns, electric arching and fires or explosions started or caused by electricity.

What does the Electricity at Work Regulations 1989 Regulation 10 state?

For the purposes of enabling injury to be prevented, adequate working space, adequate means of access, and adequate lighting shall be provided at all electrical equipment on which or near which work is being done in circumstances which may give rise to danger.

What must an employer do to comply with the Electricity at Work Regulation?

Employers duties in relation to Electrical Safety at work: Ensure electrical equipment is suitable for the purpose it is intended. Ensure that all live parts of electrical equipment are inaccessible during operation. Provide all employees with adequate training and information on electrical safety.

Is Electricity at Work Regulations Law?

Electricity at Work Regulations 1989 (EAWR) places a legal responsibility on employers and employees, as duty holders, to ensure that electrical systems used at work under their control are safe.

What is the abbreviation for the Electricity at Work Regulations 1989?

EAWR

Is PPE a regulation?

PPE legislation The Personal Protective Equipment at Work Regulations 1992 seeks to ensure that where risks cannot be controlled by other means PPE should be correctly identified and put into use.

What is the rule regarding water and electricity?

Electricity would travel through the water and through you to the ground. This is why it’s so important to keep all electrical appliances away from water, and to make sure your hands are dry and you are not standing in water when you touch anything electrical.

When did the Electricity at Work regulations come into effect?

The Electricity at Work Regulations 1989 came into force on 1st April 1990; their purpose is to require precautions to be taken against the risk of death or personal injury from electricity, in work activities.

What is the minimum PPE required?

1 The basic, or minimum, PPE to be worn by everyone at the pipeline construction site includes: Head protection (hard hat). Eye protection (safety glasses with rigid side shields). Safety footwear.