What is the purpose of a fuse tap?
What is the purpose of a fuse tap?
A fuse tap is a power splitter-type device that slides into an occupied slot in an automotive fuse block to create an additional connection point for slip-on terminals.
Does it matter which way you put a fuse tap in?
It definitely does matter! If the Add-A-Fuse is inserted with its ground pin in the +12V fuse panel socket, all power to the new added circuit would flow through both Add-A-Fuse fuses in series in addition to the power for the original circuit flowing through its fuse.
Why do fuse taps have two fuses?
If you plug this in at one orientation the fuse will only protect the end of the wires you added. The lower slot is for where your unplugging it from, so put the fuse you removed back into that slot, then the new fuse into the other slot.
How do you crimp a tap fuse?
You strip back a small portion of the wire first to expose the core then stick that bare wire into the open end of the fuse tap. Using the crimpers you place them around the plastic of the fuse tap where the wire is inserted and crimp it together.
What are the different types of fuse taps?
Blade automotive fuses and fuse taps are split between six different series, including MEGA®, MAXI®, ATC/ATO®, MINI®, MICRO2®, and MICRO3®. Cartridge automotive fuses are available in five different series: FLS, FLF, FLB, JCASE®, and MCASE®. The glass fuse and fuse tap style has a single series called AGC.
Can a car fuse be put in backwards?
It will work both ways. But if you insert it backwards the current from your dash cam flows through both fuses instead of one, which reduces the capacity of the original circuit. You would have to check the configuration of your cars fuse box and the fuse adder with a multimeter to determine the correct way.
Does car need to be off to change fuse?
You can change fuses yourself, easily and with very little expense. Before you open or work on a fuse box, be sure that your vehicle’s ignition is turned off. Never replace a fuse with one that has different amperage than the original. The new fuse has to be the same color and size as the one you’re replacing.
Are fuse taps safe to use?
The new circuit comes with its own fuse, so your device and vehicle are safe from any potential shorts or other problems. Included in the Bundle: Two (2) Low-Profile Mini Fuse Taps and Fuses.
Where is the ignition fuse located?
The ignition relay is usually found in the fuse box situated underneath the hood or somewhere under the car’s dashboard. It transfers electricity from the battery to the ignition components, which allows you to start the car in the blink of an eye.
How do you put a fuse on a tap?
Pull the selected fuse from its circuit slot. (See below to learn how to select the best circuit to use for your fuse tap.) Insert the wire from the new electrical device into the connector on the fuse tap. Be sure to cut, strip, and crimp the wire, as needed, as you would in any other electrical connection.
How do you disconnect a fuse on a car?
Disconnect the vehicle’s battery power by removing the battery cables or via a disconnect switch. Pull the selected fuse from its circuit slot. (See below to learn how to select the best circuit to use for your fuse tap.) Insert the wire from the new electrical device into the connector on the fuse tap.
How does the add a fuse kit work?
How Add-a-Fuses Works. Step 1: Insert Fuse Tap into Add-a-Fuse Kit. Our add-a-fuse kit will always include a fuse tap, which is meant to be put into the “Fuse 1” position, Step 2: Crimp the Add-a-Fuse Kit to Connect the Hardwiring Kit Cables Together. Step 3: Put the Add-a-Fuse Back into the
What kind of Fuse tap does battery Doctor use?
The Battery Doctor® fuse tap lineup includes: See individual product listings for additional information and specifications. What follows is a very basic guide to installing a fuse tap. As with any electrical project, please use caution to reduce the risk of personal injury and damage to equipment.