What kind of pinout does a RS232 connector have?

Home :: RS232 Pinout RS232 Pinout Below is the pinout of a typical standard male 9-pin RS232 connector, this connector type is also referred to as a DB9 connector. A computer’s serial COM port (DTE) is usually a male port as shown below, and any peripheral devices you connect to this port usually has a female connector (DCE).

Which is the pinout scheme for RS-232 null modem?

Standard RS-232 null modem pinout preset scheme: Loopback mode pinout preset scheme: Go to the ’Custom pinout’ tab. In the Serial Ports Explorer choose the required virtual COM port pair. Select the lines for the ‘IN’ side of the pair and connect them to the required ‘OUT’ side lines by checking the corresponding boxes.

Which is the DB-25 pin for RS232?

RS232 port (DB-25 pin). Pinout and signals for full RS232 connector Pin Name Direction Description 1 GND Shield Ground 2 TXD —» Transmit Data 3 RXD «— Receive Data 4 RTS —» Request to Send

Which is serial port has a 9 pin pinout?

A serial pinout diagram is presented below. The RS232 protocol uses a 9 pin serial port that can have either male or female connectors. The most recent version of the protocol is known as RS232C. RS232C retains the features of RS232 but uses 25 pins rather than a 9 pin serial pinout.

How does a RS232 null modem pinout work?

An RS232 null modem pinout links the Tx pin of a male connector with the Rx pin on an RS232 female and the Rx male’s pin to the female’s Tx pin. Using the RS232 protocol you can connect two computers that do not have modems by using a null modem cable.

Which is the serial connector pinout for DTE?

COM Port Pinout and Configuration. RS232 manages communication flowing between the DTE and DCE using serial pinouts of either the DB9 or DB25 variety. These D-sub connectors can terminate with an RS232 female pinout or DB25 or DB9 male connector pins. Each pin in a 9 or 25 serial connector pinout has its own distinct function.

What is the pin configuration of a bc237 transistor?

BC337, BC547, BC546, BC549, BC550, SS9014, C945 (Pin configuration of some these equivalent transistors may different from BC237, therefore it is necessary to check the transistor’s pinout before replacing)

Where can I find the BC547 transistor pinout datasheet?

Note: Complete Technical Details can be found at the datasheet give at the end of this page. BC549, BC636, BC639, 2N2222 TO-92, 2N2222 TO-18, 2N2369, 2N3055, 2N3904, 2N3906, 2SC5200

What is the maximum collector current of bc237?

BC237 is a TO-92 package NPN BJT transistor designed for general purpose applications and can be used for both switching and amplifications purposes. The maximum collector current of the transistor is 100mA due to which it can be used to drive and control many loads in circuits that falls under 100mA.