Where is the blower motor fuse located on a 2004 Chevy Impala?
Where is the blower motor fuse located on a 2004 Chevy Impala?
The 2004 Chevy Impala blower motor relay location is to the left of the steering wheel.To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses.
Which fuse is for the blower motor?
Fuse Protection To protect the blower motor power circuit, a 20-, 25- or 30-amp fuse is usually located in the fuse panel under the dash. The rating of the fuse will depend on the vehicle application and how much power the blower motor requires at full speed.
Is there a fuse for the blower?
The blower motor is powered by a fuse-like device called a relay. If your heater or air conditioner does not blow air through the vents, this could indicate that the blower motor fuse has probably blown. While replacement is easy, the exact location of your blower motor fuse may vary from vehicle to vehicle.
Where is the fuse for the blower?
Under the instrument panel, look under the glove box. On the right side of the fender wall you will find another fuse box.
How do I know if my blower motor fuse is bad?
Symptoms of a bad heater blower motor resistor
- Fan does not work at all, so no air comes out of the vents.
- Fan only works on some speeds and not others.
- Fan only works on the highest speed.
- Fan runs all the time and can’t be controlled with the fan switch.
- You see smoke coming out of the vents.
How do you check a blower motor fuse?
Use voltmeter or ohmmeter to check for a blown fuse. If you find one, replace it. Start car and see if blower motor works. If fuse blows again, check for loose circuits.
What are the signs of a bad blower motor relay?
If you have a faulty blower motor, you may experience low airflow from the vents, even when the fan is on high. There will be no air coming from the vents if your fan isn’t working due to a bad blower motor resistor.
Do all blower motors have a reset button?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
Where is the blower motor reset button?
Examine the exposed components in the furnace cabinet to locate the blower motor; look for a small silver box positioned toward the top of the cabinet. Mounted just above this box you should see a small round component with a raised red or white button at the center; this is the blower reset switch.