Where is the parking brake light switch?
Where is the parking brake light switch?
Locate your parking brake switch. If you have a foot style parking brake, the switch is under the dash mounted to or behind the lever. If you have a hand style parking brake, the switch is mounted under the center console assembly on or below the lever.
How does a handbrake light switch work?
However, the Hand Brake light is actually a multifunctional indicator. It turns on when you pull the hand brake handle to warn you that the brake is engaged when starting the car. When you pull the handle, a cable engages the brake, which is located in the rear of the vehicle.
Why is my car handbrake light on?
Why does my handbrake light keep coming on? If your handbrake intermittently illuminates, it could be right on the edge of its limit, and the sensor is flicking between on and off. It could be that you’re low on brake fluid, especially if the light flickers when driving around corners. It could also be a dodgy sensor.
How do I reset my parking brake light?
How to Reset a Brake Warning Light
- Find your vehicle’s Assembly Line Diagnostic Link port.
- Attach an OBD1 or 2 scanner to this port and turn the key in the ignition but do not start the engine.
- Press “OK” and read the code.
- Service the brakes according to the problem diagnosed by the code.
How long can I drive with brake light on?
There’s many factors that determine how long brake pads last after the warning light comes on, but there’s a rough estimate of around 1000 miles (1600 km) of driving where efficient braking will be maintained.
Why is my handbrake light not working?
The dash light not illuminating when the brake is applied is very likely a wiring issue. When the brake is applied, the power should pass through the switch and onto the bulb illuminating it. Start by checking the parking brake switch for available voltage. Then apply the brake and check for voltage after the switch.
Why won’t my handbrake light go off?
If it remains lit after the parking brake is released or if it turns on and off intermittently while you’re driving, it means you need to add brake fluid. If you check the fluid, add as needed and the light still doesn’t turn off, you’ll need to have the brake system inspected.
Is handbrake warning light part of mot?
Parking brake (‘handbrake’) The parking brake lever’s mountings will be checked for security and/or corrosion. On electronic systems a parking brake warning light illuminated is a failure.
Why wont my parking brake light go off?
Bad Switch: One common reason for the Parking Brake light to stay on is a failing or failed switch. This can be checked easily by jiggling the handle after it is down. If the light turns off (or turns off and then back on), the switch is the most likely culprit and will need to be replaced.
Is it bad to drive with brake light on?
Driving with the Brake Warning Light on should not be done as this is dangerous. It means your brakes are not working properly and need to be repaired as soon as possible.
Is a handbrake light an MOT failure?
Parking brake (‘handbrake’) The parking brake lever’s mountings will be checked for security and/or corrosion. On electronic systems a parking brake warning light illuminated is a failure. A parking brake lever must have obvious excessive travel before being rejected.