Are scroll saw blades universal?

When trying to find the best blade for your scroll saw project you will most likely be able to choose between different sizes and types of blade. The Universal number code that the sizing is based on runs from 0-12, with some sizes of blade even running into the minus numbers.

Are all scroll saw blades interchangeable?

Not only do blades come in different sizes, but the cutting teeth come in different configurations. Some manufacturers indicate this as the teeth per inch (TPI), while other manufacturers use more specific terms.

Why does my scroll saw blade keep breaking?

Using too much tension or too little tension while you are sawing is a leading cause of scroll saw blades breaking. Whether you are applying too much tension or too little tension, using improper tension is a surefire way to break your scroll saw blades. Take a minute to adjust the tension on your scroll saw.

What are the two types of blades for a scroll saw?

There are two major kinds: wood blades and metal blades. The wood blades have larger teeth and more space between the teeth. They are designed to clear the sawdust as you cut. The metal blades have much smaller teeth and less space between teeth.

How long do scroll saw blades last?

Scroll saw blades tend to last for 15-45 minutes of continual use on most wood types at moderate speeds. Thick or hardwood, high operating speeds, or tension issues (too tight/too loose) all contribute to a short blade lifespan.

Do scroll saw blades go up or down?

For the scroll saw to operate properly and safely, the scroll saw blade must install into the saw in the proper direction. The rake of the teeth, or the angles at which the teeth set on the blade, should point downward. On some reverse tooth blades figuring out which is up and which is down may be harder.

What type of scroll saw blade has half as many teeth as a standard blade?

Typically, scroll saw blades cut on the downstroke. Only cutting on the downstroke means that the back of the teeth on the blade may drag on the upstroke, creating rough edges. A reverse skip-tooth blade has the same spacing of the teeth as a regular skip-tooth blade, but half the teeth face the opposite direction.

How long should a scroll saw blade last?

15-45 minutes
Scroll saw blades tend to last for 15-45 minutes of continual use on most wood types at moderate speeds. Thick or hardwood, high operating speeds, or tension issues (too tight/too loose) all contribute to a short blade lifespan.

Should a scroll saw blade cut up or down?

Be sure the blade is right side up and that the teeth are facing downward so that they cut on the downstroke of the blade.

How often should I change scroll saw blades?

HOW LONG DOES A scroll saw blade last?