Does the Power Commander V have launch control?

When enabled, Launch Control will hold the bike at the chosen RPM regardless of the throttle position. Select the On/Off box to enable or disable Launch Control. Using the drop-down arrow, select which switch input will be used.

How do you adjust the fuel on Power Commander 5?

The Power Commander V has a built-in feature called In Field Fuel Adjustment. This is found under Power Commander Tools > Configure. This feature was added to allow people using an LCD-200 to make easy adjustments to fuel, without a computer.

How much HP does a Power Commander V add?

The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.

How do I reset a Power Commander 5?

They only last about 10 minutes.

1. Under “Tools” menu, select the “Environment Options” menu.
2. The “Environment Options” dialog opens.
3. At the bottom of the Environment Options box, the “Reset Power Commander” button will now appear.
4. Click the “Reset Power Commander” button.

What does a Dynojet Ignition Module do?

The Ignition Module helps raise the rev limit and create timing adjustment. It installs easily to your Power Commander and uses OEM connectors to plug in-line to the stock ignition with no wiring required.

How do I adjust my power commander?

Hold down all three buttons on the face of the Power Commander unit and turn on the bike’s ignition. Release all the buttons once the engine is idling normally. The Power Commander manual recommends waiting approximately 20 seconds before making any adjustments.

What does a Power Commander 5 do?

Power Commander V The PCV allows you to plug and play and adjust fuelling with preset or custom maps, which can be downloaded onto the device. It can be programmed to work with a quick shifter, you can auto-tune or add in two maps, one for fuel economy and one for outright performance.

Is a Power Commander worth it?

Generally, the benefits of a power commander will work best with a full system exhaust (not a slip-on), as it creates more power and allows for a wider range of adjustments. If you’re more performance oriented, then a power commander may be worth the investment to get a smoother, more powerful ride.

How much does it cost to install power commander?

Cost here is about $300 depending on where I get it. Shop: My local shop says they will install and set the bike up on their dyno for $550+tax.

How do I reprogram my Power Commander V?

Can you reprogram a power commander?

Once you have communication established, go to the “Tools” menu and select “Environmental Options”. A window will appear that has a black rectangular button at the bottom that reads “Reset Power Commander”.