How do I fix F1 error on my washing machine?
How do I fix F1 error on my washing machine?
To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn’t work, you will need to replace the control board. The only tools that you need to replace the control board is a Phillips screw driver and a 1/4” hex head driver.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does F01 mean on a Maytag washing machine?
a obstruction in a hose or tube
maytag washer with error code F01 means a obstruction in a hose or tube, not a control panel issue like people say.
What does F1 on a stove mean?
The F1 error means that there is an electronics failure within the oven. This failure can occur within the keypad itself, the electronic oven control or the oven temperature sensor. The error can also indicate data corruption within the oven’s electronic controller.
Why does Dryer say F1?
The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.
Can you reset a Maytag washing machine?
If an error message causes your Maytag washer to not run properly, reset the washer to clear the error message. You also can reset the washer if you want to cancel a setting you chose.
How do I fix my Maytag SD error?
Maytag acknowledges that error codes like “Sd” sometimes appear by mistake. Push the “Pause/Cancel” twice or “Power” button once to remove the code from the screen and try using the washer again. If the code returns, unplug the washer for 60 seconds and try the cycle again before calling for assistance.
What does error code F01 mean?
failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.
How do I fix error E1 f9 on Maytag washer?
Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub. Do not tape over drain opening. Also make sure that the drain hose end is higher than 36 inches from the floor.
How do I fix F1 error on stove?
Resetting the Display Try the bake or broil feature once more, and if the error code repeats, unplug the appliance and wait five minutes before plugging it back in. Reset the clock to the correct time of day and try selecting the feature again.
How do I fix the F1 error on my Maytag oven?
To fix the error, try pressing the key to unstick it. If it continues to be an ongoing issue, you will have to replace the touch pad or touch pad/control board if they are one assembled unit. The Maytag oven F1 error code indicates the touchpad or control board (clock) on your oven is faulty.
What does the F1 code mean on a Maytag oven?
My guess, after looking yesterday & seeing the error codes for the unit, is that it is most likely the clock, but could also be the Oven Temp sensor. Sears service said the F1 code was almost always the clock on this unit.
What to do if your Maytag oven is not working?
6 – Turn power back ON to the Oven. 7 – Watch for the F1 error code and listen for the beeping sound. 8 – If the error code F1 reappears and beeps then replace the ERC (electronic range control). 9 – If after 1 to 2 minutes after applying power back to the Oven, you DO NOT get the F1 error then replace the touch pad.
Is there a F3 fault code on Maytag clocks?
The F3 code has shown up only once. I called Maytag’s service, they could only recommend a service technician in the area (who naturally hasn’t returned my phone call). I called Sears, and the person I spoke with said it was most likely the clock (according to them, it’s a single unit).
Why does my Maytag Maxima return an error code?
Important: The error codes, returned by your Maytag Maxima washer, will help you solve most issues occurring while you use it. Keep this guide in a safe place to have it at hand when some problems come around. When you turn on your washer, and it returns this code while the cycle is on it means the dedicated sensor detects excess suds.