How do I log into my sky hub router?

Check you’re connected to your Sky Broadband, then:

1. In a browser address bar, go to 192.168.0.1.
2. Select Wireless or WiFi.
3. Enter the default username admin.
4. And depending on which hub you have, the password sky or the WiFi password on the back of your hub.
5. Enter a new Network Key – that’s the WiFi password you want to use.

How do I reset my sky Home Hub?

The Sky Broadband Hub reset works a little differently. To do this, first press the reset button down (located on the back of the hub). Then wait until the power light flashes off and on (should do this four times) before remaining on. This whole process takes about ten seconds.

How do I find out my Sky router username and password?

Accessing your router settings page 192.168. 0.1

1. Make sure you’re connected to your home broadband network.
2. Open your browser and type 192.168. 0.1 into your address bar.
3. When prompted enter the username: admin and password: sky OR, your WIFI password.

How do I access my Sky router settings?

Check you’re connected to your Sky Broadband, then:

1. In a browser address bar, go to 192.168. 0.1.
2. Enter the default username admin.
3. And depending on which hub you have, the password sky or the WiFi password on the back of your hub.

How do I access my router admin?

Introduction

1. Open a web browser such as Internet Explorer.
2. Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.
3. A new window prompts for a User name and Password. Type admin for User name and Password, since admin is the default user name password, and then click OK.

Why is there an orange light on my Sky router?

If the light is continually flashing amber, your Sky router is experiencing problems establishing a permanent internet connection. Press the power button on the back of the router, wait for 10 seconds, then turn it back on again. It can take up to 60 seconds for your router to re-establish an internet connection.

Where do I Enter my Sky Hub password?

In a browser address bar, enter 192.168.0.1. Select Wireless. Enter the default username admin. And depending on which hub you have, the password sky or your WiFi password.

What should I do if my Sky Hub is not working?

Change your Sky wireless channel; Set up port forwarding; Block access to your Sky Hub at certain times; My username and password are not working . If this happens you can easily reset your Sky Hub to factory default settings. You just need to hold down the reset button on the back of the Sky Hub for ten seconds, until the power light flashes.

How can I Reset my Sky Broadband account?

You just need to hold down the reset button on the back of the Sky Hub for ten seconds, until the power light flashes. By doing a factory reset, you will revert the Sky Hub to its default settings, removing all changes you’ve made and resetting the username to admin and the password to sky For further support, ask the Sky Broadband community.

How can I Manage my Sky TV package?

Once you log in to the My Account section, you now get an overview of your TV package. By clicking each tile you can see which channels are contained in each section of your package. From here you can manage each pack and we’ll direct you to the next best action.