How do I print a configuration page in jetdirect?

How do I print a configuration page in jetdirect?

The current TCP/IP address as well as the status of the HP Jetdirect can be viewed on its Configuration page. Print a Configuration page by using the printer’s control panel Information menu or by using the Test button of an external or an LIO HP Jetdirect print server.

How do I set up HP jetdirect?

Step one: Install the HP Jetdirect print server

  1. Go to and select the country/language.
  2. Click Troubleshooting.
  3. Type the Jetdirect accessory name or model number into the Find my product search field and click Go.
  4. Select the model.
  5. Click Manuals.
  6. Select the manual type or click view all.

How do I reset my HP jetdirect 500x?

This has worked, for me, on most JetDirect Print Servers like the 300x & 500x.

  1. Step 1: Power off the HP Jetdirect print server.
  2. Step 2: Hold down the TEST button.
  3. Step 3: Apply power to the HP Jetdirect print server.
  4. Step 4: Continue holding the TEST button for 5 to 30 seconds.

What is HP jetdirect socket?

HP JetDirect Socket describes the process in which the printer is connected to the server/system. A JetDirect Socket means that the server communicates with the printer via a standard TCP socket connection over the network. PaperCut should automatically detect all your JetDirect HP printers upon install.

How do I find my printer configuration page?

From the Home screen on the printer control panel, swipe right to navigate, and then touch Reports. From the Reports menu, touch Configuration/Status Pages. Select the Configuration Page item, and then touch the Print button to print the Configuration pages.

How do I access HP printer settings?

Follow these steps to change your printer’s default settings:

  1. Type “Devices” into the main search bar at the bottom left of your screen.
  2. Select “Devices and Printers” from the results list.
  3. Right click on the appropriate printer icon.
  4. Select “Printing Preferences”
  5. Change print settings, click “OK”
  6. Ready, set, print!

What is HP FutureSmart?

HP FutureSmart firmware is a powerful operating system available on HP LaserJet and HP PageWide Enterprise and Managed printers. Seamlessly incorporate paper documents with digital content right from the printer. A tablet-like interface streamlines day-to-day and maintenance operations from the control panel.

How do I reset my HP printer IP address?

Click Networking tab, change the required IP address, subnet mask, and gateway. Change the IP configuration method from Auto to Manual, click Apply, and OK. Change back the IP address of the computer to the original IP address.

How do I setup my HP jetdirect 300X?

Configure An HP JetDirect 300X Print Server

  1. Press and hold the TEST button on the top while plugging in the power.
  2. After 5 seconds, let go of the TEST button. (
  3. Unplug the 300X and plug in a CAT-5 cable to your network (Needs a DHCP Server..)
  4. Connect up a printer to the server.
  5. Power up the 300X server.

Which port should I use for my wireless printer?

USB001 is the default printer port for USB printers and is the first port Windows selects when connecting a printer via the operating system’s Devices and Printers “Add a Printer” utility.

How to check the status of HP Jetdirect?

Print a Configuration page or a Self-Test page from the printer or from the external HP Jetdirect. Check the TCP/IP status, and make sure the TCP/IP addresses are valid. Also, verify the TCP/IP configuration of the computer.

Where can I find the embedded web server on HP Jetdirect?

HP Jetdirect devices have an embedded Web page in the firmware which can be accessed through this port. The Embedded Web Server page allows a user to configure the HP Jetdirect using a supported browser. •88 TCP and UDP for Kerberos.

How does Jetdirect work on a HP printer?

When the printer or HP Jetdirect print server is turned on for the first time or when it is reset to factory defaults, the HP Jetdirect print server broadcasts BootP and DHCP requests. BootP is a bootstrap protocol used to automatically download an IP address and other TCP/IP parameters from a network server.

What is the default IP address for HP Jetdirect?

The default IP address of an HP Jetdirect will usually be either 169.254.x.x or For example, if the HP Jetdirect default is and the computer’s IP address is, the route add command would be: Using a supported Web browser, enter the IP address of the HP Jetdirect print server as you would a URL.