How do I reset my NComputing password?

As the vSpace Administrator with access to the vSpace Console, click Devices. Locate the device with the unknown password and right-click to select set/reset password. To factory reset your NComputing device, you will need to contact our Technical Support for assistance.

How do I factory reset my NComputing?

RX-HDX Factory Reset

1. When booting up, repeatedly press both Ctrl and Shift keys until a text-based prompt appears.
2. You will see the below on the display.
3. Type in “yes” within 10 seconds and press enter.
4. The device will factory reset itself and reboot.

How do I reset my L300 NComputing?

N-Series Factory reset

1. Boot the device and watch for the NComputing logo.
2. As soon as the NComputing logo appears, press and HOLD the “R” key on your keyboard. Note that timing is very important.
3. Once the screen goes blank, release the “R” key.

What is NComputing L300?

The L300 is a game-changing virtual desktop client device. Its sleek low-power design and form factor is easily mounted on a monitor or secured to a desk. With the ability to connect up to 100 user sessions to a single vSpace Pro server, the combination provides a simple and powerful desktop virtualization solution.

How do I update my NComputing RX300 firmware?

On the vSpace host system, launch the NComputing Console by navigating to: Start > All Programs > NComputing vSpace Console. Click on Manage devices. Click on the “Update Firmware” button on the top of the window. Select From FTP Server or VSpace Server.

How do I configure my NComputing device?

vSpace, First Time Installation Best Practices.

1. Use the appropriate hardware. Our Scaling Guide will help you determine how much resources you need for your NComputing server.
2. Use a clean server.
3. Make sure to update the native motherboard drivers.
4. Update your Operating System.
5. Install vSpace.

What is NComputing and how it works?

NComputing is a desktop virtualization company that manufactures hardware and software to create virtual desktops (sometimes called zero clients or thin clients) which enable multiple users to simultaneously share a single operating system instance.

How do I update firmware on Ncomputing l250?

Update via thin client device firmware menu

1. Turn on the device.
2. Click on Device Setup.
3. Click on the Update Tab.
4. On the Manual Update section, click on Update Now.
5. Let the device go through the update cycle.
6. Your firmware update is now complete.

How do I set up and configure NComputing?

Here are some tips on installing our vSpace platform for the first time:

1. Use the appropriate hardware. Our Scaling Guide will help you determine how much resources you need for your NComputing server.
2. Use a clean server.
3. Make sure to update the native motherboard drivers.
4. Update your Operating System.
5. Install vSpace.

How do I start NComputing?

How do I update my NComputing l300 firmware?