How do I reset my Rainbird SST timer?

How do I reset my Rainbird SST timer?

How can I clear all the programming and reset my Rain Bird ESP-Me sprinkler timer back to the factory default settings?

  1. Turn the dial to Seasonal Adjust.
  2. Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen.
  3. Turn the dial back to AUTO RUN.

How do you turn off start time on Rainbird?

Press the right or the left arrows to toggle between start times and find one of the other start times to turn off. Press the + or – buttons to change the time setting. To turn the start time to “OFF” you will find it between “11:45pm and 12:00am”. Leave the time on off.

How do you skip a sprinkler zone?

To remove the entire valve: Turn off the water to the entire sprinkler system. Then manually turn ON the valve you want to remove, the sprinklers will come on for a few seconds then slowly shut off as the water discharges from the pipes and the pressure is released.

Why does my sprinkler system skip a zone?

If the pump is located more than a few feet from the water source, the inside valve disc pops up and down, skipping zones as the supply line fills with purging air.

How long should I run drip irrigation?

When a drip system is installed, it should be designed so it has the flexibility to change the amount of emitters and the location of the emitters in the landscape. Each emitter should give you at least a 30-minute run time without runoff.

How many lines are needed per dripper?

1 or 2 emitters per plant, depending on the size of the plant. Trees and large shrubs may need more. Obviously, using two allows for a backup if one clogs up (which happens now and then, even on the best designed and maintained drip systems.) But just as important, more emitters also wet more soil area.

How long should I run each sprinkler zone?

about 30-40 minutes
Water Thoroughly: Rotor zones should run for about 30-40 minutes per zone and spray zones 10-15 minutes per zone. 2. Water Frequently : Sod areas should be watered at least 2 or 3 times daily for the first two weeks. 3.