How do I reset my Whirlpool ice maker?

Press the on/off Switch

1. Remove the ice tray and cover plate (or just the ice tray).
2. Turn the switch from on to off.
3. Unplug the ice maker at the mains.
4. Wait 10 minutes.
5. Plug the ice maker in again.
6. Turn the switch from off to on.
7. Replace the ice tray and the cover plate as necessary.

Why is my Whirlpool refrigerator not making ice?

A Whirlpool refrigerator not making ice may come down to incorrect temperature settings. For proper ice production, the freezer should be set between 0-5°F. If the temperature is too warm, ice may not adequately freeze and can appear smaller or misshapen.

Does a Whirlpool refrigerator have a reset button?

Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.

Is there a reset button on a Whirlpool refrigerator?

Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.

Can you reset a Whirlpool refrigerator by unplugging it?

Reset power to the product: Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes. Power unit up by turning on the circuit breaker(s) or plugging the product back in. Ensure the cooling function is turned on. Test the control panel functionality.

How often does a whirlpool ice maker cycle?

about 16 times per day
They usually take about 90 minutes to produce around 10 cubes of ice. It will then cycle about 16 times per day or until the ice bin is full. Most people don’t use a glass full of ice, but even if you do, you should have a full glass ready in an hour and a half.

How do I force my Maytag ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin.
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.