How do you do a dot pre-trip inspection?

Walk Around the Truck

1. Checking all of the tires on the tractor and trailer for wear, damage, and proper air pressure.
2. Inspect the electrical cord and airlines to make sure they’re connected correctly.
3. Make sure the 5th wheel is securely coupled to the trailer.

How long should a dot pre-trip inspection take?

How Long Should A Pre-Trip Inspection Take? There is no regulated time requirement for pre-trip inspections. However, a complete pre-trip inspection can generally take drivers anywhere from 20 to 50 minutes.

What do you look for in a pre-trip inspection?

A pre-trip inspection is simply a thorough check of your truck to make sure everything is functioning before you get behind the wheel. A basic DOT pre-trip inspection includes checking your fluid levels, leaks, tires, 5th wheel, brakes, clutch, shock absorbers, ball joints, kingpins, gauges, lights, and more.

What is a pre-trip inspection test?

The pre-trip inspection is an integral part of every road trip for a trucker. This inspection is meant to be a thorough check of the truck, trailer and load. The check is to ensure that everything is in correct working order, prior to the truck and driver, departing on a trip.

When you do a walk around inspection you should check?

25. What are some things you should check on the front of your vehicle when doing the walk-around inspection?

• Low beams, high beams, four way flashers, turn signals.
• Tires, steering parts, suspension parts, headlights.
• None of these.
• Windshield, wipers, mirrors, hood latches.
• Oil, transmission, air compressor, radiator.

What 3 kinds of emergency equipment must you have?

What three kinds of emergency equipment must you have? Spare electrical fuses, three red reflective triangles, properly charged and rated fire extinguisher.

What is the 7 step inspection method?

1. Overview (4)
2. Engine (4)
3. Cab (4)
4. Heads/Hazards (4)
5. Walkaround I.
6. Walkaround II.
7. Signals (4)
8. Brakes (4)