How do you light the pilot on a gas fireplace Ignitor?

Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.

Can you manually light a gas fireplace with electronic ignition?

If your gas fireplace has an energy-saving, alternating pilot ignition system, it will need electricity to trigger the pilot flame every time the fireplace is used. If you have a wireless remote control, or a wall switch with a display, find the control box of the fireplace and switch to manual.

What do you do when your gas fireplace won’t light?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. 4. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

Should the pilot light always be on in a gas fireplace?

Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.

What causes a gas fireplace not to light?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

How do I know if my gas fireplace is working?

A properly operating gas fireplace will have a safe and secure glass enclosure, will ignite without delay, have a clean blueish color flame and will vent properly out through a termination cap that is clear from debris or obstruction.

Is it safe to turn off a gas starter in a fireplace?

These flames light the wood; once the wood is well-lit, you can turn off the gas starter. Gas starters are safe if you use and maintain them properly. Be sure to do a pressure test on any new gas lines to ensure that there are no leaks.

What should I do if my fireplace is not lit?

Without any gas, your fireplace won’t be able to light. Check the main gas valve to see if the gas is fully operational. If the gas is on and the pilot hasn’t been lit in a couple months, you might need to purge the air out of the pilot tubing.

How to light a gas fireplace at Home Depot?

1 Place a long lighter next to the burner and pull the fuel trigger. 2 Turn the key in the slot to open the gas valve. You may hear the hiss of gas entering the burner. The pilot should light immediately. 3 Replace the key cover. 4 Use the key to control the height of the flames.

What to do if your fireplace is on the Fritz?

Here are some steps to take if your gas fireplace is on the fritz. Double check that the gas is actually on if your gas fireplace isn’t working correctly. Without any gas, your fireplace won’t be able to light. Check the main gas valve to see if the gas is fully operational.