How do you program a universal remote to a RCA TV?

How do you program a universal remote to a RCA TV?

Follow these easy steps:

  1. Manually turn on your TV.
  2. Aim your remote at the TV panel and press and hold the TV button.
  3. Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
  4. Press the Play or the Slow button on your remote for five seconds.

How do I program my RCA universal remote without a code?

If your RCA universal remote does not have a Code Search button

  1. Power on the equipment you want to control.
  2. Press and hold the button on the universal remote that matches the device you’re pairing (e.g. if it’s a DVD player, press the DVD button).

What are the universal remote codes for RCA TVs?

The 5 digit codes for most programmable universal remote controls for RCA televisions are: 11547 11447 10047 10093 10679 11047 11147 11247 11347 11781 11948 11953 12002 12187 12247 12434. 2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light. 3. With the button lit, point the remote at the TV and enter…

How do I set up my RCA remote?

Here are the instructions you need to follow. 1. Manually turn on the device you want to set up, making sure that your RCA universal remote is aiming towards it. 2. Press and hold the button that matches the device you are pairing. Wait for the light on the remote to blink and then stay steady for you to follow the next step.

What is the code for the RCA converter box?

After the RCA Converter Box is setup, refer to the TV remote code list belowto use the RCA converter box remote on your specific TV.

Where can I find the universal remote code?

Below we mentioned each and every brand code and also added DVD, VCR and TV RCA universal remote codes so you no need to go anywhere to find rca remote codes, for programming RCA remote read below instructions which mentioned below this table.