Questions and answers

Is the Mathews No Cam a good bow?

by Chase Collins

Is the Mathews No Cam a good bow?

In summary, the NO CAM HTR is a fantastic bow for the bowhunter who wants smooth, consistent accuracy. Give it a try, and you just might find it to be your ultimate bow. But, if you’re into speed, Mathews just released their answer.

How fast is the Mathews No Cam?

330 fps
Mathews rates the NO CAM HTR (its 6… -inch brace height hunting bow) “up to 330 fps” IBO with the 65-percent module (as let-off percentage decreases, so does top-end speed).

What year did Mathews no Cam come out?

Roughly once per decade a new design changes the archery industry. The Wisconsin-based Mathews, Inc. did it in 1992 when it unveiled its SoloCam bows that, with its large “idler wheel” turning in unison with a cam on bottom, greatly mitigated timing issues more common with dual-cam bows.

How much does a Mathews No Cam HTR weigh?

Mathews No Cam HTR Specifications

Brace Height 6.625 “
Draw Weight 40 lbs – 70 lbs
IBO Speed 321 fps – 330 fps
Weight 4.14 lbs
Let-Off 65%, 75%, 85%

What is the fastest Mathews bow ever made?

XLR8
The XLR8, with a 5-inch brace height and 360 IBO, stands to this day as the fastest “Mathews” compound bow ever made.

What is the lightest Mathews bow?

Weighing a mere 4.24 pounds, this bow is lightweight and ultra maneuverable.

  • Axle-to-Axle 30.5″
  • Brace Height 7″
  • IBO Rating 335 FPS.

Is single cam or dual cam better?

The pros and cons of both single and Twin cams become less and less significant as technology makes both better….Comparing single and dual cam systems.

Criteria Single cam Dual cam
Speed Slower Faster
Noise Quieter Noisier
Accuracy More accurate Less accurate
Maintenance Easy and less frequent Harder and more frequent

What’s the let off percentage on a Mathews No Cam HTR?

Depending on the “Rock Mod” specified, let-off is 65, 75, or 85 percent and its integrated draw stop is responsible for the bow’s solid back wall. Mathews rates the NO CAM HTR (its 6…-inch brace height hunting bow) “up to 330 fps” IBO with the 65-percent module (as let-off percentage decreases, so does top-end speed).

Is the Mathews No Cam HTR a good bow?

In summary, the NO CAM HTR is a fantastic bow for the bowhunter who wants smooth, consistent accuracy. Give it a try, and you just might find it to be your ultimate bow. But, if you’re into speed, Mathews just released their answer. The new Monster Wake is a high-end speed bow that boasts an IBO rating of 352 fps with an 85 percent letoff!

Where is the grip on a Mathews No Cam HTR?

In fact, it’s not. Because the arrow shelf is machined to look like the riser, and the grip is located under the shelf, it gives the illusion that the top half is longer when in reality, both upper and lower cam axles measure exactly 16 ¾ inches from the Berger button.

What’s the top speed of a no cam HTR?

It’s important to note that the No Cam HTR comes standard with the 85-percent letoff RockMod, so that is how I tested it. The published top IBO speed of 330 fps is based on the optional 65-percent RockMod. Mathews bows are generally easy to set up and tune, and the HTR was, if anything, more so.

Blog

Is the Mathews no Cam a good bow?

by Chase Collins

Is the Mathews no Cam a good bow?

In summary, the NO CAM HTR is a fantastic bow for the bowhunter who wants smooth, consistent accuracy. Give it a try, and you just might find it to be your ultimate bow. But, if you’re into speed, Mathews just released their answer.

What year is the Mathews no Cam?

In 2014, Mathews is attempting to influence the industry again with its NO CAM bow. Here’s the scoop. Most noticeable about this new bow is its namesake design; it has no cams, rather two 4.82-inch-diameter wheels centered on both upper and lower axles.

What is a Mathews no Cam?

This year, Mathews introduced a new, groundbreaking line of bows, unveiling their NO CAM ST™ Technology. Our revolutionary NO CAM ST™ Technology utilizes two circular and concentric string tracks, allowing the string to travel at a constant distance from the center of rotation during the shot cycle.

Is a Mathews bow worth the money?

In my opinion, Mathews are definately worth the money but my suggestion would be to shoot several brands and models and find the one that works best for you. Sometimes the most expensive is not necessarily the best. Go to a pro shop and let them fit you and shoot several bows.

What happened to single cam bows?

Single cam bows are alive & well. However, they do seem to be going out of fashion in favor of cam 1/2 and two cam systems. Many, but certainly not all, manufacturers put single cams on their less expensive bows. The disadvantage of single cams is that there is one specific orientation of the cam that shoots the best.

Does Mathews still make a single cam bow?

Mathews still makes the Conquest. That’s a single cam.

What is the fastest Mathews bow?

XLR8
The XLR8, with a 5-inch brace height and 360 IBO, stands to this day as the fastest “Mathews” compound bow ever made.

Is Mathews better than Hoyt?

I love the Hoyt grip and draw cycle. Saying that, the Mathews is not shabby. Mathews are heavier by just a little, faster, quieter, and with less vibration. I could not give $600 more for a bow not quite as good.

Are Mathews bows made in the USA?

You can be confident in your investment knowing all our bows are designed and built in the USA and backed by a lifetime warranty.

What is the best Mathews bow ever made?

Of those 200, here are the five we’ve narrowed down as the best Mathews bows of all time.

  • Mathews MQ1: The SoloCam Classic.
  • Mathews Switchback XT: The Bowhunting Fan Favorite.
  • Mathews McPherson Monster XLR8: The Speed Demon.
  • Mathews Halon: The Best System Yet.
  • Mathews Genesis: The Ultimate Trainer.

Is the Mathews No Cam HTR a good bow?

In summary, the NO CAM HTR is a fantastic bow for the bowhunter who wants smooth, consistent accuracy. Give it a try, and you just might find it to be your ultimate bow. But, if you’re into speed, Mathews just released their answer. The new Monster Wake is a high-end speed bow that boasts an IBO rating of 352 fps with an 85 percent letoff!

When did the Mathews solocam bow come out?

Mathews’ Solocam massively influenced the sport of archery in 1992. A single cam below a small “idler wheel” on top produced a bow that didn’t have the synchronization issues possible in two-cam bows.

Which is the best bow for Mathew Mathews?

Judging only from friends and helping them get theirs dialed in, I would have to agree that the Traverse and the Halon 32 seem to be the most forgiving bows mathews has had recently. The no cam bows lacked some performance, but they were very “shootable” as well…

What are the features of a no cam bow?

Other features found on the No Cam bows are the now-familiar Harmonic Stabilizers, Reverse Assist Roller Guard and the recently introduced Focus Grip. The shortness of the limbs, together with the length and lack of reflex give the No Cam HTR a somewhat uncurvaceous appearance more common to a target bow than a hunting bow.