Helpful tips

What does E41 mean on a washing machine?

What does E41 mean on a washing machine?

Cause: The appliance door / lid is open or not closed correctly. The appliance is overloaded. The door lock is faulty.

How do I reset my AEG lavamat washing machine?

To reset this you need to turn the dial to off. Press and hold the start button and the button to the left of it. Keep them held in and turn the dial 1 click clockwise. Once the screen starts to flash let go of the buttons.

How do I fix E40 error on AEG washing machine?

If error message E40 occurs or the washing machine beeps or blinks 4 times, there is a problem with the door lock. The door may not be closed properly. Press this until you hear a click and restart the washing program.

What does E10 mean on a AEG washing machine?

Issue. Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash. It indicates a problem with not taking in water, not taken in enough water or problems with the drain.

How do you reset a Frigidaire front load washer?


  1. Locate the “Pause/Cancel” button on the front panel of the washer.
  2. Press the “Pause/Cancel” button. This pauses a load if one is currently washing.
  3. Press the “Pause/Cancel” button again. This cancels the settings and resets them.

How do I reset my AEG?


  1. Make sure the door is fully closed. Open and close the door again.
  2. Make sure the delay start function is disabled. Press and hold ‘Reset’ for about 5 seconds.
  3. Check if the previous cycle is still in progress. If a cycle is still in progress it needs to be cancelled before programming the next cycle.

How do you reset AEG dryer?

Make sure you load your dryer properly. Push the door until you hear it click. Unplug the power cord for 30 seconds and restart the dryer cycle.

Why is my AEG washing machine not working?

If the appliance is still dead, unplug the appliance again and check the fuse in the plug. If no method of checking the fuse exists, replace it with a known working 13 Amp fuse. If the appliance is still not working, please contact your local Authorised Service Center. Call 03445 611 611 to arrange a service call.

How do I reset my AEG 8000 washing machine?


  1. 9000 series washing machine. In the programme list screen, tap on the shortcut to enter the setting menu.
  2. 8000 series washing machine.
  3. 6000 series washing machine. press and hold the and the buttons for at least 10 seconds simultaneously until the second acoustic signal.

How do you reset a washing machine sensor?

First, you should perform a general reset of the machine. Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians.

What’s the error code on my AEG washing machine?

The AEG washing machines and washer dryers that these error codes relate to those that use what they call the “EWM2000evo” and AEG Nexxxt display boards and it’s these fault codes that we will cover in this article.

What is fault code on AEG lavamat L 99695 HWD?

The fault code on my AEG Lavamat L 99695 HWD is EE4, which is not listed here. Symptom: does not start the drying cycle. Any chance to know what it means and have it added here? I agree to the terms and conditions. I consent to this website collecting my details through this form.

Why does my washing machine have an error code E30?

If the digital display on your washing machine is showing either E30/E31/E40/E41/E42/E43/E44/E45 error code, the most likely cause for this could be a faulty door lock. Luckily, we have looked into the possible causes for the issue to arise and hope to help you restore your appliance to its former glory.

Is there a fault code on my washing machine?

If these fault codes apply to your machine is should have a facia panel on it like one of those shown below, there are fifteen known variants covering quite literally hundreds of different models sold in the UK and across the EU.