What hazard class is formaldehyde?

Hazard Class: UN 1198 (3, Flammable) UN 2209 (8, Corrosive) Formaldehyde is a FLAMMABLE GAS or COMBUSTIBLE SOLUTION. Use dry chemical, CO2, water spray or alcohol-resistant foam as extinguishing agents. Use water spray to reduce vapors. POISONOUS GASES ARE PRODUCED IN FIRE.

What class is formaldehyde?

Aldehyde
Organic compound
Formaldehyde/Classification

What are the hazards of formaldehyde?

When formaldehyde is present in the air at levels exceeding 0.1 ppm, some individuals may experience adverse effects such as watery eyes; burning sensations in the eyes, nose, and throat; coughing; wheezing; nausea; and skin irritation.

What is the CAS number for formaldehyde?

50-00-0
Formaldehyde (CAS 50-00-0)

Is formalin toxic to humans?

Formalin is irritating, corrosive and toxic and absorbed from all surfaces of the body. Ingestion is rare because of alarming odour and irritant effect but documented in accidental, homicidal or suicidal attempts.

What products contain formaldehyde?

Formaldehyde is found in:

• Resins used in the manufacture of composite wood products (i.e., hardwood plywood, particleboard and medium-density fiberboard);
• Building materials and insulation;
• Household products such as glues, permanent press fabrics, paints and coatings, lacquers and finishes, and paper products;

Is formaldehyde toxic to humans?

Formaldehyde can cause irritation of the skin, eyes, nose, and throat. High levels of exposure may cause some types of cancers. Learn more from the Agency for Toxic Substances and Disease Registry about the health effects of formaldehyde exposure.

Is formaldehyde a disinfectant?

Overview. Formaldehyde is used as a disinfectant and sterilant in both its liquid and gaseous states. Ingestion of formaldehyde can be fatal, and long-term exposure to low levels in the air or on the skin can cause asthma-like respiratory problems and skin irritation, such as dermatitis and itching.

What is another name for formaldehyde?

Formaldehyde can be listed on a product label by other names, such as: Formalin. Formic aldehyde. Methanediol.

What are the levels of formaldehyde in the air?

According to a 1997 report by the U.S. Consumer Product Safety Commission, formaldehyde is normally present in both indoor and outdoor air at low levels, usually less than 0.03 parts of formaldehyde per million parts of air (ppm). Materials containing formaldehyde can release formaldehyde gas or vapor into the air.

How is formaldehyde used in the construction industry?

Urea-formaldehyde (UF) and phenol formaldehyde (PF) resins are used in foam insulations, as adhesives in the production of particle board and plywood, and in the treating of textiles. Exposures to formaldehyde are addressed in specific OSHA standards for general industry, maritime, and construction.

What is the formula for formaldehyde in solids?

Solids containing varying amounts of formaldehyde, probably as paraformaldehyde (polymers of formula HO (CH2O)xH where x averages about 30). A hazard to the environment. Immediate steps should be taken to limit spread to the environment.

How does formaldehyde affect the risk of lung cancer?

However, the rate of lung cancer deaths did not increase with higher levels of formaldehyde exposure. This observation led the researchers to conclude that factors other than formaldehyde exposure might have caused the increased deaths.