# What is a dent on a heddle?

## What is a dent on a heddle?

Rigid heddle looms come with reeds in a range of sizes, from 2.5 dents to 15 dents. A “dent” equals the number of threads per inch of warp yarn. A 12-dent reed will have 6 slots and 6 holes per inch allowing you to thread 12 warp ends per inch.

What is a dent in weaving?

Both the wires and the slots in the reed are known as dents (namely, teeth). The warp threads pass through the dents after going through the heddles and before becoming woven cloth. The number of dents per inch (or per cm or per 10 cm) indicates the number of gaps in the reed per linear width.

How is heddle measured?

To figure out which size heddle you need, first measure your loom’s heddle bars from the top of the top bar to the bottom of the bottom bar. The heddles you need will be a little bit longer than the distance you measure (to give them space to move back and forth).

The dents are the spaces in the reed through which the yarns are threaded in groups of two, three or more depending on the number of ends per centimetre required, the type of yarn being used and the weave.

What is a injurious dent?

Mechanical damage includes features such as creasing of the pipe wall, gouges, scrapes, smeared metal, and metal loss due to corrosion. (d) Plain dents are defined injurious if they exceed a depth of 6% of the nominal pipe diameter.

Is sett the same as Dent?

An 8 dent reed has eight spaces (called a dent) for yarn per inch. The spacing of the warp yarn is called the sett, and determines how the final fabric feels based on how thick your yarns are and what you’re weaving.

## How is Reed count calculated?

It is calculated in stock port system.No. of dents in 2 inches is called Reed Count….Effective Weave Density = W. D x K of loom width x K of Design.

Wp / filling – K Loom Width – K Weave Design – K
Polyester Filament = 1.22 220 cm – 1.02 Drill 1/3 = 0.77
250 cm – 1.08 Satin 1/4 = 0.69
330 cm – 1.15
360 cm – 1.20

What is loom width?

A table loom can measure up to approximately 24 inches (60 cm) in width and have between 2 and 16 shafts. There is one lever for each shaft, and shafts are raised and lowered by hand, using the levers at the side of the loom each time you insert a weft thread (pick) into the shed.

How does a heddle bar work?

Heddle bar helps to speed up the weaving process by creating an opening between alternating warp threads. There twice as many grooves on a heddle bar as on a warp beam. The best threads to use for warp are the ones that are not too elastic or stretchy.

### What are the different sizes of rigid heddles?

The rigid heddle is like your knitting needle or crochet hook. You have to use the right heddle to get “gauge”. There are four sizes of rigid heddle, 5, 8, 10, and 12. Generally speaking you would use a 5 for bulky yarns, 8 for DK or worsted yarns, 10 for sport-weight yarns,…

How many dents are in a kromski Heddle?

Heddles come in a variety of sizes called dents to allow you to control of number of ends per inch. The standard Kromski heddle is 8-dent. Also available are 5, 10 and 12-dent heddles. Kromski North America 1103 N. Main St.

How many holes are in a size 8 Heddle?

The number means that there are x number of spaces in an inch. A size 8 rigid-heddle has 8 spaces per inch, four slots and four holes. If you have a size 12 rigid heddle and you threaded all the slots and holes you would have 12 yarns or “ends” per inch.

## How many heddles are in Ashford rigid heddle loom?

It comes with a 7.5-dent heddle, 2 stick shuttles, 2 threading hooks, clamps and a weaving guide. The heddle blocks on the inside of the loom are conveniently notched to hold the heddle in place when needed. Options: floor stand, extra heddles (5, 7.5, 10 and 12.5 dents), second heddle kit for multi-heddle weaving.