What is a wood slide drawer mechanism?

Wooden slides. Traditionally, drawers have slid on wooden runners: strips of wood tenoned into horizontal rails at the face of a cabinet. They let your drawer sides and joinery shine without intrusion by metal hardware.

What is the best lubricant for wood drawers?

Rub paraffin on the meeting parts of drawers to keep them working smoothly. You’ll find paraffin with the canning supplies in your local grocery store. In a pinch you can also use candles, bar soap or even dry spray lubricant.

How do you get wooden dresser drawers to slide easier?

Here are two tips for getting your drawers sliding as smooth as butter. Rub paraffin on the meeting parts of drawers to keep them working smoothly. You’ll find paraffin with the canning supplies in your local grocery store. In a pinch you can also use candles, bar soap or even dry spray lubricant.

Is WD-40 bad for wood?

WD-40 can be used on just about everything. It is safe for metal, rubber, wood and plastic. WD-40 can be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40.

How do I know what size drawer slides I need?

Measure the box, not the drawer front Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.

How much space do you need for drawer slides?

Most side-mount slides require 1/2” to 17/32” of clearance on each side of a drawer. That means each drawer should be 1” to 1-1/16” smaller than the opening to fit properly. Under-mount slides attach to the bottoms of drawer boxes and can’t be seen when the drawers are open.