What is Error 321 on HP fax?

The 321 error is described as such. There was a communication error with the receiving fax machine due to poor telephone line conditions. If the session fails after sending several pages of a large document, resend the document as several smaller documents.

What is Error 350 hp fax?

The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power outages and other power-related problems.

How do I fix communication error on fax?

Fax Communication Error Message

1. Power OFF the Machine, Wait 10 Seconds, Then Power ON.
2. Make Sure the Correct Fax Country Code Has Been Selected.
3. Disable the Junk Fax Filter Feature.
4. Make Sure the Telephone Line Cable on the Back of the Machine is Securely Connected.

How do I fix my HP fax Error 344?

Fix the HP Fax Error 344 Using Easy Solutions

1. Solution 1: Modify error correction mode.
2. Solution 2: Modify your fax speed.
3. Solution 3: Try to rebuild the connection.
4. Solution 4: Change the LAN settings.
5. Solution 5: Update the printer driver.

What is Error 344 hp fax?

1. The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power outages and other power-related problems.

What is Error 344 on a fax machine?

What causes fax transmission errors?

Communication error, usually because the fax hardware is incompatible, often caused by outdated hardware. Communication error, usually because the fax hardware is incompatible, often caused by outdated hardware. Communication error, usually because the fax hardware is incompatible, often caused by outdated hardware.

Why is my fax not sending?

The Failed (Communication error) could occur for different reasons: The call was disconnected before the fax could be sent. Normally, this error occurs when the far side hangs up. The fax service attempted to send the same message multiple times unsuccessfully.

Why is my fax failing?

Faxes can fail for a variety of reasons, such as sending to a non-working or non-fax number, a recipient listing their number on the National Do Not Call List, a recipient line being continually busy or out of paper, or if there is noise or interference on the line.

What is HP Officejet fax error 388?

A.: According to the HP Support website, 388 error codes are caused when ‘there is too much noise on the line for a valid connection between two fax machines to complete. ‘ HP suggests the following as a potential solution: ‘Retry the fax reception when telephone line conditions have improved.

Why does my fax machine say communication error?

The ‘Comm Error’ message may appear on the Brother machine’s display if the machine experienced a communication error while sending or receiving a fax. This type of error is generally caused by interference on the telephone line, an incorrect telephone line connection, or an alarm system or other device on the line.

What happens if a fax isn’t answered?

Fax machines will automatically retry calls in case the receiving end fails to answer. It is easy to adjust the number of times the machine redials by just checking your machine.