What is Scotts spreader setting for Ironite?
What is Scotts spreader setting for Ironite?
Ironite recommends different spreader settings based on the make and model. For example, it recommended using a setting of “9” for a Vigoro rotary spreader and a setting of “13” for an Earthway drop spreader.
How do you calibrate a Lesco spreader?
To recalibrate your LESCO rotary spreader after a period of use, adjust the rate control arm to the ”24” position. Open the operating lever and insert the even-numbered LESCO Calibration Gauge into one of the open holes in the hopper bottom.
Can you put Ironite and fertilizer down at the same time?
The answer is yes. You can apply both ironite and fertilizers to your lawn at the same time. However, since ironite is a supplement, you should first be aware of whether your plants or the grass, in general, are deficient in certain nutrients or not.
Can you mix Ironite with Scotts Turf Builder?
Answer: Ironite Mineral Supplement 1-0-1 is intended as a supplement so applying at the same time should be fine as long as you do not over-apply the products. 17 of 17 people found this answer helpful.
What setting should Scotts spreader grass be set at?
For a pushed broadcast spreader, Scotts recommends a setting of 2 1/4 when overseeding and a bare-lawn setting of 4. For application with a handheld broadcast spreader, use a setting of 3 when overseeding and 4 when planting a bare lawn.
How do you calibrate a fertilizer spreader?
How to Calibrate a Spreader
- Determine the amount of fertilizer needed for 100 sq. ft. For example, the fertilizer bag weighs 25 lbs. and covers 5,000 sq.
- Place this amount in the spreader.
- Mark off the area. For a rotary spreader, use a 10-foot by 10-foot area (100 sq. ft).
- Apply using the suggested setting.
How often should you add lime to your lawn?
every 1-2 years
How Often Should I Lime My Lawn? Once the lawn area is limed, you may need to repeat that process every 1-2 years. Sometimes a bit longer, but that decision always begins with a soil pH test.