Where should an extractor fan be placed in a bathroom?
Where should an extractor fan be placed in a bathroom?
Extractor fans work best when they are fitted as near as possible to the source of moisture in the air. For many people, this will be over their shower enclosure or bath.
Can a 230V fan be installed in Zone 1?
Answer: Yes, it is permitted to install a 230V extractor fan in Zone 1 of a bathroom provided all the relevant requirements of BS 7671 are met.
Can you fit an extractor fan in Zone 1?
Bathroom Zone 1 – IPX4 Recommended extractor fans which are rated to a minimum of IPX4 include: Silent 100. Silent Design 100.
How do I stop condensation in my bathroom fan in the winter?
Adding insulation around the duct may solve the problem. The fan’s damper can also get stuck in the open position, allowing hot air into the cool duct and creating condensation. Check the small damper at the fan. It should open when the fan is on and close when the fan turns off.
Can you install a bathroom fan above a shower?
You can place the fan directly over the bathtub or shower base, but it’s sufficient to position it anywhere near the bathing area. If the bathing area is in its own room, that room needs its own fan, and you might want to add another fan for the main bathroom area, or wherever the toilet is located.
What is the most powerful extractor fan for a bathroom?
Vents Turbo Tube Pro Inline Duct Fan Installed above the bathroom in the loft or ceiling void. With a whopping 245m3/hr extraction rate it’s the most powerful 4 inch fan on the market. Mounted in the loft above the bathroom, this inline fan can be ducted from directly above the shower or bath.
What does Zone 1 and 2 mean in bathroom lighting?
Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required.
Where is zone 1 and 2 in a bathroom?
The space under the bath tub or shower basin is considered to be zone 1. However, if the space under the bath or shower basin is only accessible with a tool, it is considered to be outside the zones. Zone 2 for a bathroom is the same height as zone 1 (2.25m) extended to 0.6m around the bath.
How do I vent a bathroom fan into the wall?
Project details
- Step 1: Bath Vent Overview.
- Step 2: Drill a Reference Hole.
- Step 3: Mark the Ceiling.
- Step 4: Cut the Intake-Port Hole.
- Step 5: Position the Fan.
- Step 6: Attach the Fan to the Joists.
- Step 7: Cut a Duct Hole Through the Sidewall.
- Step 8: Attach the Exhaust Duct to the Wall Cap.