What is conical tool?

Conical Tool is a leading manufacturer of carbide end mills, chamfer cutter, tapered milling cutters, runner cutters and dovetail cutters.

What is a tapered tool?

A machine taper is a system for securing cutting tools or toolholders in the spindle of a machine tool or power tool. A male member of conical form (that is, with a taper) fits into the female socket, which has a matching taper of equal angle.

What is a conical cutter?

Innovative Tool Technology The conical barrel cutter represents a completely new type of milling tool geometry that was developed by OPEN MIND. With conventional barrel cutters, only medium radii of 50mm to 100mm are possible. Its innovative 5-axis technology sets virtually no limits to machining.

What is a 5 degree taper?

These 5 degree tapered end mills have a 5 degree taper per side. The mills are single ended with three flutes and have a square end. They produce grooves, holes, or milled sides with a 5 degree angle. They are used specifically for designed parts that require an angled side wall.

What is a chamfer mill?

A chamfer mill, or a chamfer cutter, is one of the most common tools used by machinists daily. When creating a part, machining operations can oftentimes leave a sharp edge on a workpiece. A chamfer mill eliminates sharp edges, leaving a sloped surface, or a chamfer, instead.

What is taper mill?

Taper mills or “conical mills” produce grooves, holes, or milled sides with a sloped angle. They are used specifically for designed parts that require an angled side wall. They are three flute, square end, with a 30° helix.

What does a 7/24 taper mean?

One of the most common self-locking tapers is the Morse taper. This holder tapers at a rate of about ⅝” (15.875mm) per foot of axial length. These holders have a cone that tapers at 3.5 ” (88.9mm) per foot and are often called 7/24 tapers (7 ” of taper per 24 ” of axial length), or steep tapers.

What is conical shape?

By definition, a conical shape is a three-dimensional shape that looks like a cone. A cone is flat on one end and gradually tapers toward a single…

What angle is a chamfer usually?

Threaded-hole chamfers normally have included angles of 120° or 90°, with 90° being most common. The OD and depth of the chamfer sometimes are specified on the blueprint.

Is the conical tool catalog updated for 2017?

NEW UPDATED CATALOG! The 2017 Conical Tool catalog featuring our line of high-speed steel and carbide end mills, tapered end mills and specialty cutting tools. Request for quote and technical information is also available for download, and we will be adding other materials as they become available.

Who are the distributors of conical cutting tools?

Conical Cutting Tools sells its products to end users via a network of professional industrial tool supply and cutting tool distributors. The map to the right matches our manufacturing representatives to regions throughout the United States.

Where can I find the conical tool network?

The map to the right matches our manufacturing representatives to regions throughout the United States. Using our logistics and flexible capacity, we are able to produce blanket stock or standard orders for international customers, whether large or small.

What can you do with conical end mills?

For milling of ball joints and tie rod internal diameter holes; ferrous materials.We designed our Conical Automotive Tapers with a left hand spiral and right hand cut, to get the most out of the high speed steel….. NEW UPDATED CATALOG!